On Sat, 2024-03-02 at 08:25 -0800, Drew Fustini wrote: > On Sat, Mar 02, 2024 at 10:13:55PM +0800, Xi Ruoyao wrote: > > On Wed, 2023-12-06 at 00:09 -0800, Drew Fustini wrote: > > > Add emmc node properties for the eMMC device and add sdio0 node > > > properties for the microSD slot. Set the frequency for the sdhci > > > reference clock. > > > > Hi Drew, > > > > I've been using the emmc on LicheePi 4A for a while without any problem, > > but when I try the microSD slot I get: > > > > [ 0.531804] mmc1: SDHCI controller on ffe7090000.mmc [ffe7090000.mmc] using ADMA 64-bit > > [ 0.842674] mmc1: Tuning failed, falling back to fixed sampling clock > > [ 0.855139] mmc1: tuning execution failed: -5 > > [ 0.859609] mmc1: error -5 whilst initialising SD card > > [ 11.359879] mmc1: Timeout waiting for hardware cmd interrupt. > > [ 11.365661] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== > > [ 11.372105] mmc1: sdhci: Sys addr: 0x00000001 | Version: 0x00000005 > > [ 11.378547] mmc1: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000000 > > [ 11.384989] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000010 > > [ 11.391432] mmc1: sdhci: Present: 0x03ff0000 | Host ctl: 0x00000017 > > [ 11.397873] mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 > > [ 11.404312] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000000f > > [ 11.410753] mmc1: sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 > > [ 11.417192] mmc1: sdhci: Int enab: 0x00000020 | Sig enab: 0x00000020 > > [ 11.423633] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 > > [ 11.430073] mmc1: sdhci: Caps: 0x3f69c881 | Caps_1: 0x08008177 > > [ 11.436513] mmc1: sdhci: Cmd: 0x00000102 | Max curr: 0x00191919 > > [ 11.442954] mmc1: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x07725f7f > > [ 11.449394] mmc1: sdhci: Resp[2]: 0x32db7900 | Resp[3]: 0x00400e00 > > [ 11.455835] mmc1: sdhci: Host ctl2: 0x0000300b > > [ 11.460280] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000882220 > > [ 11.467416] mmc1: sdhci: ============================================ > > [ 11.563828] mmc1: Tuning failed, falling back to fixed sampling clock > > [ 11.576053] mmc1: tuning execution failed: -5 > > [ 11.646438] mmc1: new high speed SDXC card at address aaaa > > [ 11.653170] mmcblk1: mmc1:aaaa SR256 238 GiB > > > > I can write something into the SD card and read it back though. But > > this makes me reluctant to use the SD card for "some real thing" afraid > > of a data loss. > > > > The SD card is a SanDisk Extreme Pro 256GB (rated "U3, A2, V30"). > > > > Any idea how to debug this issue further? (Maybe I should try change > > the SD card first but I'd like to discuss the issue before paying money > > for another card.) > > Revy informed me that downclocking from 198 MHz to 100 MHz [1] has been > observed to solve this problem. Could you try the following dts patch? I'm still getting the same error. > Also, I have noticed the T-Head's 5.10 vendor kernel does have some > updates in sdhci-of-dwcmshc.c related to tuning. I'll look at porting > those to the upstream driving. Maybe to solve the problem we need both the downclocking and these changes then... -- Xi Ruoyao <xry111@xxxxxxxxxxx> School of Aerospace Science and Technology, Xidian University
