Add cm40 subsystem. Add cm40_lpuart and lpurt1 for 8dxl evk boards. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- Changes in v2: - commit message "Adding" to Add - fixed regulator@101 warning - remove 'modem reset' - order nodes by access - move interrupt-parent under top bus - clean up other dtb check warning - Link to v1: https://lore.kernel.org/r/20240228-m4_lpuart-v1-0-9e6947be15e7@xxxxxxx --- Alice Guo (1): arm64: dts: imx8dxl: add lpuart device in cm40 subsystem Dong Aisheng (1): arm64: dts: imx8: add cm40 subsystem dtsi Frank Li (2): arm64: dts: imx8dxl: update cm40 irq number informaiton dts: arm64: imx8dxl-evk: add lpuart1 and cm40 uart arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi | 91 +++++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 37 ++++++++++ arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 13 ++++ arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 1 + 4 files changed, 142 insertions(+) --- base-commit: 9acc053fc8f256959e849cb6588a054074daebcd change-id: 20240228-m4_lpuart-30791c032f2a Best regards, -- Frank Li <Frank.Li@xxxxxxx>