On Fri, Mar 01, 2024 at 04:05:25PM +0000, Conor Dooley wrote: > On Thu, Feb 29, 2024 at 02:38:24PM -0500, Frank Li wrote: > > On Thu, Feb 29, 2024 at 06:57:29PM +0000, Conor Dooley wrote: > > > On Thu, Feb 29, 2024 at 06:55:58PM +0000, Conor Dooley wrote: > > > > On Tue, Feb 27, 2024 at 03:54:11PM -0500, Frank Li wrote: > > > > > Some sai only connect one direction. So allow only "rx" or "tx" for > > > > > dma-names. > > > > > > > > Which sai? Can you restrict this per compatible please, so that someone > > > > cannot add 2 dmas for ones where only the tx is supported. > > > > > > > > | dmas: > > > > | minItems: 1 > > > > | items: > > > > | - description: DMA controller phandle and request line for RX > > > > | - description: DMA controller phandle and request line for TX > > > > > > > > The binding already allows only one, but it documents that the first dma > > > > is always the RX dma, and that doesn't change with this patch.. > > > > > > I said "doesn't change" - but I don't think you can change this > > > trivially, as something could rely on the first dma being the rx one. > > > You'd have to check that there is nothing using these using indices > > > rather than names before making any changes here. > > > > Linux driver and dts with tx only work well. Only issue is dtb_check will > > report error. I want to eliminate these DTB_CHECK warning. > > Linux is not the only user of these bindings, citing linux as your > evidence here is only sufficient if no other users exist. Do they? But, 'dmas' should be common property for all these bindings? I don't think they use 'descriptions:' property, which should guide dts writer to write dts file. actually words 'DMA controller phandle and request line' just nonsense words. let 'regs', it'd better descript at 'reg-names' instead of 'regs' if reg-names exist. Only meansful words is "RX" and "TX", which already show at "dma-names". > > > And it also reasonable, only rx or tx for a special SAI. > > > > Can we remove 'description'? dmas should already descripted at common place > > and 'RX' and 'TX' are listed at 'dma-names' > > Removing the description has the same problem. The existing binding has > set a fixed order that you now want to make flexible. Actually original set minItems: is 1, which means allow 1 channel. but set items to force two channel. Does it work oneOf: items: - description: TX - description: RX items: - description: TX items: - description: RX > > Thanks, > Conor.