Hi, Here are a few simple patches for the jz4740. First adds dynamic sampling support to jz4740-i2s. Then two to add a simple binding and DT support. Then a patch to set the clock rate for i2s. These are in preparation for jz4780 and ci20 later on. Patches are based on 3.19-rc7. Quite disjoint and stay within jz4740 so should apply easily on other trees. If you would like to have them rebased to a different tree, please tell. Thank-you V4 changes: Added Acked-by: Lars-Peter Clausen <lars@xxxxxxxxxx> Rebased on 3.19-rc7 Removed patch 4 which was redundant V3 changes: Added dma binding to example but forgot to put it in required properties. V2 changes: Removed a redundant #define Added #ifdef CONFIG_OF Added dma in binding document Removed a redundant call to clk_prepare_enable Zubair Lutfullah Kakakhel (3): sound: soc: jz4740: Add dynamic sampling rate support to jz4740-i2s dt: sound: jz4740: Add binding documentation for jz4740-i2s sound: soc: jz4740: Add DT support to jz4740-i2s driver .../bindings/sound/ingenic,jz4740-i2s.txt | 23 ++++++++++++++++++++++ sound/soc/jz4740/jz4740-i2s.c | 21 +++++++++++++++++++- 2 files changed, 43 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html