Re: [PATCH RFT 4/7] phy: qcom: qmp-combo: register a typec mux to change the QPHY_MODE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 29 Feb 2024 at 15:08, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:
>
> Register a typec mux in order to change the PHY mode on the Type-C
> mux events depending on the mode and the svid when in Altmode setup.
>
> The DisplayPort phy should be left enabled if is still powered on
> by the DRM DisplayPort controller, so bail out until the DisplayPort
> PHY is not powered off.
>
> The Type-C Mode/SVID only changes on plug/unplug, and USB SAFE states
> will be set in between of USB-Only, Combo and DisplayPort Only so
> this will leave enough time to the DRM DisplayPort controller to
> turn of the DisplayPort PHY.

I think this is not fully correct. Please correct me if I'm wrong, but
it is possible to switch between USB / USB+DP / DP-only at runtime.
See the Status Update and Configure commands.

>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 122 ++++++++++++++++++++++++++++--
>  1 file changed, 117 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index ac5d528fd7a1..b5fb6cbcf867 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -19,6 +19,7 @@
>  #include <linux/reset.h>
>  #include <linux/slab.h>
>  #include <linux/usb/typec.h>
> +#include <linux/usb/typec_dp.h>
>  #include <linux/usb/typec_mux.h>
>
>  #include <drm/bridge/aux-bridge.h>
> @@ -1515,6 +1516,10 @@ struct qmp_combo {
>
>         struct typec_switch_dev *sw;
>         enum typec_orientation orientation;
> +
> +       struct typec_mux_dev *mux;
> +       unsigned long mux_mode;
> +       unsigned int svid;
>  };
>
>  static void qmp_v3_dp_aux_init(struct qmp_combo *qmp);
> @@ -3295,17 +3300,111 @@ static int qmp_combo_typec_switch_set(struct typec_switch_dev *sw,
>         return 0;
>  }
>
> -static void qmp_combo_typec_unregister(void *data)
> +static int qmp_combo_typec_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
> +{
> +       struct qmp_combo *qmp = typec_mux_get_drvdata(mux);
> +       const struct qmp_phy_cfg *cfg = qmp->cfg;
> +       enum qphy_mode new_mode;
> +       unsigned int svid;
> +
> +       if (state->mode == qmp->mode)
> +               return 0;
> +
> +       mutex_lock(&qmp->phy_mutex);
> +
> +       if (state->alt)
> +               svid = state->alt->svid;
> +       else
> +               svid = 0; // No SVID
> +
> +       if (svid) {

We should check svid against USB_TYPEC_DP_SID. Otherwise the driver
will mishandle the USB_SID_PD states.

> +               switch (state->mode) {
> +                       /* DP Only */
> +                       case TYPEC_DP_STATE_C:
> +                       case TYPEC_DP_STATE_E:
> +                               new_mode = QPHY_MODE_DP_ONLY;
> +                               break;
> +
> +                               /* DP + USB */
> +                       case TYPEC_DP_STATE_D:
> +                       case TYPEC_DP_STATE_F:
> +                               /* Safe fallback...*/
> +                       default:
> +                               new_mode = QPHY_MODE_COMBO;
> +                               break;
> +               }
> +       } else {
> +               /* Only switch to USB_ONLY when we know we only have USB3 */
> +               if (qmp->mux_mode == TYPEC_MODE_USB3)
> +                       new_mode = QPHY_MODE_USB_ONLY;
> +               else
> +                       new_mode = QPHY_MODE_COMBO;
> +       }
> +
> +       if (new_mode == qmp->init_mode) {
> +               dev_dbg(qmp->dev, "typec_mux_set: same phy mode, bail out\n");
> +               qmp->mode = state->mode;
> +               goto out;
> +       }
> +
> +       if (qmp->init_mode != QPHY_MODE_USB_ONLY && qmp->dp_powered_on) {
> +               dev_dbg(qmp->dev, "typec_mux_set: DP is still powered on, delaying switch\n");
> +               goto out;
> +       }
> +
> +       dev_dbg(qmp->dev, "typec_mux_set: switching from phy mode %d to %d\n",
> +               qmp->init_mode, new_mode);
> +
> +       qmp->mux_mode = state->mode;
> +       qmp->init_mode = new_mode;
> +
> +       if (qmp->init_count) {
> +               if (qmp->usb_init_count)
> +                       qmp_combo_usb_power_off(qmp->usb_phy);
> +               if (qmp->dp_init_count)
> +                       writel(DP_PHY_PD_CTL_PSR_PWRDN, qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL);
> +               qmp_combo_com_exit(qmp, true);
> +
> +               /* Now everything's powered down, power up the right PHYs */
> +
> +               qmp_combo_com_init(qmp, true);
> +               if (qmp->init_mode == QPHY_MODE_DP_ONLY && qmp->usb_init_count) {
> +                       qmp->usb_init_count--;
> +               } else if (qmp->init_mode != QPHY_MODE_DP_ONLY) {
> +                       qmp_combo_usb_power_on(qmp->usb_phy);
> +                       if (!qmp->usb_init_count)
> +                               qmp->usb_init_count++;
> +               }
> +               if (qmp->init_mode != QPHY_MODE_USB_ONLY && qmp->dp_init_count)
> +                       cfg->dp_aux_init(qmp);
> +       }
> +
> +out:
> +       mutex_unlock(&qmp->phy_mutex);
> +
> +       return 0;
> +}
> +
> +static void qmp_combo_typec_switch_unregister(void *data)
>  {
>         struct qmp_combo *qmp = data;
>
>         typec_switch_unregister(qmp->sw);
>  }
>
> -static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
> +static void qmp_combo_typec_mux_unregister(void *data)
> +{
> +       struct qmp_combo *qmp = data;
> +
> +       typec_mux_unregister(qmp->mux);
> +}
> +
> +static int qmp_combo_typec_register(struct qmp_combo *qmp)
>  {
>         struct typec_switch_desc sw_desc = {};
> +       struct typec_mux_desc mux_desc = { };
>         struct device *dev = qmp->dev;
> +       int ret;
>
>         sw_desc.drvdata = qmp;
>         sw_desc.fwnode = dev->fwnode;
> @@ -3316,10 +3415,23 @@ static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
>                 return PTR_ERR(qmp->sw);
>         }
>
> -       return devm_add_action_or_reset(dev, qmp_combo_typec_unregister, qmp);
> +       ret = devm_add_action_or_reset(dev, qmp_combo_typec_switch_unregister, qmp);
> +       if (ret)
> +               return ret;
> +
> +       mux_desc.drvdata = qmp;
> +       mux_desc.fwnode = dev->fwnode;
> +       mux_desc.set = qmp_combo_typec_mux_set;
> +       qmp->mux = typec_mux_register(dev, &mux_desc);
> +       if (IS_ERR(qmp->mux)) {
> +               dev_err(dev, "Unable to register typec mux: %pe\n", qmp->mux);
> +               return PTR_ERR(qmp->mux);
> +       }
> +
> +       return devm_add_action_or_reset(dev, qmp_combo_typec_mux_unregister, qmp);
>  }
>  #else
> -static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
> +static int qmp_combo_typec_register(struct qmp_combo *qmp)
>  {
>         return 0;
>  }
> @@ -3532,7 +3644,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
>         if (ret)
>                 return ret;
>
> -       ret = qmp_combo_typec_switch_register(qmp);
> +       ret = qmp_combo_typec_register(qmp);
>         if (ret)
>                 return ret;
>
>
> --
> 2.34.1
>
>


-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux