Re: [PATCH RFT 7/7] arm64: dts: qcom-mode-switch: allow 4 lanes for DisplayPort and enable QMP PHY mode-switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bad copy-pasta, subject should be:
[PATCH RFT 7/7] arm64: dts: wcom-sc8280xp-lenovo-thinkpad-x13: allow 4 lanes for DisplayPort and enable QMP PHY mode-switch

On 29/02/2024 14:07, Neil Armstrong wrote:
Allow up to 4 lanes for the DisplayPort link from the PHYs to the Controllers
and allow mode-switch events to the QMP Combo PHYs.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 6 ++++--
  1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index a0fdef55a40a..6c73e0fc001f 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -556,7 +556,7 @@ &mdss0_dp0 {
  };
&mdss0_dp0_out {
-	data-lanes = <0 1>;
+	data-lanes = <0 1 2 3>;
  	remote-endpoint = <&usb_0_qmpphy_dp_in>;
  };
@@ -565,7 +565,7 @@ &mdss0_dp1 {
  };
&mdss0_dp1_out {
-	data-lanes = <0 1>;
+	data-lanes = <0 1 2 3>;
  	remote-endpoint = <&usb_1_qmpphy_dp_in>;
  };
@@ -1112,6 +1112,7 @@ &usb_0_qmpphy {
  	vdda-phy-supply = <&vreg_l9d>;
  	vdda-pll-supply = <&vreg_l4d>;
+ mode-switch;
  	orientation-switch;
status = "okay";
@@ -1149,6 +1150,7 @@ &usb_1_qmpphy {
  	vdda-phy-supply = <&vreg_l4b>;
  	vdda-pll-supply = <&vreg_l3b>;
+ mode-switch;
  	orientation-switch;
status = "okay";






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux