Re: [PATCH 18/22] ASoC: dt-bindings: mt8195: Document audio-routing and dai-link subnode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 29/02/24 09:25, Krzysztof Kozlowski ha scritto:
On 27/02/2024 13:09, AngeloGioacchino Del Regno wrote:
Document the dai-link subnodes and the audio-routing property, allowing
to describe machine specific audio hardware and links in device tree.

While at it, also deprecate the old properties which were previously
used with driver hardcoded configuration.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---


mediatek,adsp:
      $ref: /schemas/types.yaml#/definitions/phandle
@@ -45,12 +56,75 @@ properties:
        A list of the desired dai-links in the sound card. Each entry is a
        name defined in the machine driver.
+patternProperties:
+  ".*-dai-link$":
+    type: object
+    description:
+      Container for dai-link level properties and CODEC sub-nodes.
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name
+        items:

That's not a list, but just enum.


Ok! Will change for v2.

+          enum:
+            - DPTX_BE
+            - ETDM1_IN_BE
+            - ETDM2_IN_BE
+            - ETDM1_OUT_BE
+            - ETDM2_OUT_BE
+            - ETDM3_OUT_BE
+            - PCM1_BE
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 2
+        required:
+          - sound-dai
+
+      dai-format:
+        description: audio format
+        items:

Ditto

+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+
+      mediatek,clk-provider:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Indicates dai-link clock master.
+        items:

Ditto

+          enum:
+            - cpu
+            - codec
+
+    additionalProperties: false

This goes either to the top of the section (after type:object) for
readability or after required: block below.


I think I actually saw this in some other binding, that's why it's there... or
maybe I am confusing something else - whatever.

I'll move it, anyway - thanks

+
+    required:
+      - link-name
+
  additionalProperties: false

required:
    - compatible
    - mediatek,platform
+# Disallow legacy properties if dai-link-xxx nodes are specified
+if:
+  not:

I don't think this works. To test if node is present or node, you would
need to use required.
https://elixir.bootlin.com/linux/v6.4-rc7/source/Documentation/devicetree/bindings/net/qcom,ipa.yaml#L174

Are you sure this if:then: works as expected?


Honestly, coming up with something that worked took me almost a full hour.
I was going a bit crazy over this one :-)

btw - Yes, it does work.

If you wanna give it a shot too, patch 21 and 22 are introducing the audio-routing
and (x)-dai-link nodes in (respectively) mt8195-cherry.dtsi and mt8186-corsola.dtsi
devicetrees - and those do validate just fine both with and without those patches.

I also tested this by adding the forbidden dptx-codec/hdmi-codec properties along
with the dai-link nodes in the example of this yaml file, and I've verified that
adding those makes the validation fail as expected.

Exactly, this is what I want and also what I've tested with dtbs/dt_binding_check:

fmt: (test nodes/properties) <- (result)

x-dai-link { ... }; mediatek,dptx-codec = <...>; <- FAIL (OK)
x-dai-link { ... }; mediatek,hdmi-codec = <...>; <- FAIL (OK)
x-dai-link { ... }; mediatek,dptx-codec = ..; mediatek,hdmi-codec .. <- FAIL (OK)

x-dai-link { ... }; (none of those two) <- PASS (OK)

(NO x-dai-link) mediatek,dptx-codec = <...> <- PASS (OK)
(NO x-dai-link) mediatek,hdmi-codec = <...> <- PASS (OK)
(NO x-dai-link) mediatek,dptx-codec = <...> mediatek,hdmi-codec = <...> <- PASS(OK)

...and of course, also tested the easy part
dai-link-x { ... }; <- FAIL (OK)    :-)

Cheers,
Angelo


+    patternProperties:
+      ".*-dai-link$": false
+then:
+  properties:
+    mediatek,dptx-codec: false
+    mediatek,hdmi-codec: false
+
  examples:
    - |


Best regards,
Krzysztof








[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux