Hi Dario On 1/27/24 16:28, Dario Binacchi wrote:
The series adds display support for the stm32f769-disco board. It has been tested on hardware revisions MB1225-B03 and MB1166-A09. This required modifications to the nt35510 driver that have already been applied. Changes in v10: - Drop backlight. From a closer analysis of the schematics en.MB1225-F769I-B01_Schematic.pdf and en.mb1166-default-a09-schematic.pdf, it is noticed that the GPIO I14 is connected to an unmounted resistor (n/a), making the backlight functionality via GPIO unusable. - Drop backlight references Changes in v9: - Drop 'interrupts' property to fix yaml checks - Rename vcc_3v3 to to vcc-3v3 - Rename panel-dsi@0 to panel@0 to fix yaml warnings - Change commit message - Rename stm32f769-disco-mb1225-revb03-mb1166-reva09 to stm32f769-disco-mb1166-reva09 Changes in v8: - Add Acked-by tag of Lee Jones - Add Reviewed-by tag of Raphael Gallais-Pou - Add Reviewed-by tag of Raphael Gallais-Pou - Remove unit name from 'ltdc/port/endpoint@0' to fix the compiling warning: ../arch/arm/boot/dts/st/stm32f769-disco.dts:189.28-191.5: Warning (unit_address_vs_reg): /soc/display-controller@40016800/port/endpoint@0: node has a unit name, but no reg or ranges property - Add Reviewed-by tag of Linus Walleij - Add Reviewed-by tag of Raphael Gallais-Pou Changes in v7: - Replace .dts with .dtb in the Makefile Changes in v6: - Drop patches - [5/8] dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK - [7/8] drm/panel: nt35510: move hardwired parameters to configuration - [8/8] drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK because applied by the maintainer Linus Walleij Changes in v5: - Replace GPIOD_ASIS with GPIOD_OUT_HIGH in the call to devm_gpiod_get_optional(). Changes in v2: - Add Acked-by tag of Conor Dooley - Change the status of panel_backlight node to "disabled" - Delete backlight property from panel0 node. - Re-write the patch [8/8] "drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK" in the same style as the original driver. Dario Binacchi (5): dt-bindings: mfd: stm32f7: Add binding definition for DSI ARM: dts: stm32: add DSI support on stm32f769 ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco ARM: dts: stm32: add display support on stm32f769-disco ARM: dts: add stm32f769-disco-mb1166-reva09 arch/arm/boot/dts/st/Makefile | 1 + .../dts/st/stm32f769-disco-mb1166-reva09.dts | 13 ++++ arch/arm/boot/dts/st/stm32f769-disco.dts | 70 +++++++++++++++++-- arch/arm/boot/dts/st/stm32f769.dtsi | 20 ++++++ include/dt-bindings/mfd/stm32f7-rcc.h | 1 + 5 files changed, 101 insertions(+), 4 deletions(-) create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts create mode 100644 arch/arm/boot/dts/st/stm32f769.dtsi
Series applied on stm32-next. Thanks for your efforts. Alex
