On Wed, Feb 28, 2024 at 11:07:58AM -0600, Rob Herring wrote: > On Fri, Feb 23, 2024 at 09:47:05AM +0800, Inochi Amaoto wrote: > > On Thu, Feb 22, 2024 at 05:33:34PM -0700, Rob Herring wrote: > > > On Tue, Feb 20, 2024 at 06:28:59PM +0800, Inochi Amaoto wrote: > > > > CV18XX/SG200X series SoCs have a special top misc system controller, > > > > which provides register access for several devices. In addition to > > > > register access, this system controller also contains some subdevices > > > > (such as dmamux). > > > > > > > > Add bindings for top misc controller of CV18XX/SG200X series SoC. > > > > > > > > Signed-off-by: Inochi Amaoto <inochiama@xxxxxxxxxxx> > > > > --- > > > > .../soc/sophgo/sophgo,cv1800-top-syscon.yaml | 48 +++++++++++++++++++ > > > > 1 file changed, 48 insertions(+) > > > > create mode 100644 Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.yaml > > > > > > > > diff --git a/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.yaml > > > > new file mode 100644 > > > > index 000000000000..29825fee66d5 > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800-top-syscon.yaml > > > > @@ -0,0 +1,48 @@ > > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > > > +%YAML 1.2 > > > > +--- > > > > +$id: http://devicetree.org/schemas/soc/sophgo/sophgo,cv1800-top-syscon.yaml# > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > + > > > > +title: Sophgo CV1800/SG2000 SoC top system controller > > > > + > > > > +maintainers: > > > > + - Inochi Amaoto <inochiama@xxxxxxxxxxx> > > > > + > > > > +description: > > > > + The Sophgo CV1800/SG2000 SoC top misc system controller provides > > > > + register access to configure related modules. > > > > + > > > > +properties: > > > > + compatible: > > > > + items: > > > > + - const: sophgo,cv1800-top-syscon > > > > + - const: syscon > > > > + - const: simple-mfd > > > > + > > > > + reg: > > > > + maxItems: 1 > > > > + > > > > +required: > > > > + - compatible > > > > + - reg > > > > + > > > > +additionalProperties: > > > > + type: object > > > > + > > > > +examples: > > > > + - | > > > > + syscon@3000000 { > > > > + compatible = "sophgo,cv1800-top-syscon", > > > > + "syscon", "simple-mfd"; > > > > + reg = <0x03000000 0x1000>; > > > > + > > > > + dma-router { > > > > > > Is there no defined register set you can put in 'reg' here? > > > > > > > It has multiple registers in the syscon. But in fact, the dmamux > > is a virtual device. And the syscon device only have some discrete > > registers. This is why I did not put reg. It should access the > > device using the offset defined in the patch 3. > > I would add: > > reg = <0x154 8>, <0x298 0x4>; This is what I have done before. :) > > (with appropriate "ranges" in parent) > > No requirement for Linux to use this either. It seems like that the device should only be described, right? Also a small question, is it better to add reg-names for this? > > Rob