Re: [PATCH v11 2/4] dt-bindings: remoteproc: add Tightly Coupled Memory (TCM) bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

Ping for reviews. Also have question.

I am referring this patch from patchwork link: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240219174437.3722620-8-tanmay.shah@xxxxxxx/

Patchwork shows that dtbs-check was failed, but I am sending dts changes in next patch. So dtbs-check failure only with bindings patch is expected.

How to resolve this? Should I send dtb changes same as bindings? Or we can ignore dtbs-check errors for now?

Thanks,

Tanmay

On 2/19/24 11:44 AM, Tanmay Shah wrote:
> From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
>
> Introduce bindings for TCM memory address space on AMD-xilinx Zynq
> UltraScale+ platform. It will help in defining TCM in device-tree
> and make it's access platform agnostic and data-driven.
>
> Tightly-coupled memories(TCMs) are low-latency memory that provides
> predictable instruction execution and predictable data load/store
> timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
> banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
>
> The TCM resources(reg, reg-names and power-domain) are documented for
> each TCM in the R5 node. The reg and reg-names are made as required
> properties as we don't want to hardcode TCM addresses for future
> platforms and for zu+ legacy implementation will ensure that the
> old dts w/o reg/reg-names works and stable ABI is maintained.
>
> It also extends the examples for TCM split and lockstep modes.
>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
> Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
> ---
>
> Changes in v11:
>   - Fix yamllint warning and reduce indentation as needed
>
>  .../remoteproc/xlnx,zynqmp-r5fss.yaml         | 192 ++++++++++++++++--
>  1 file changed, 170 insertions(+), 22 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> index 78aac69f1060..77030edf41fa 100644
> --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> @@ -20,9 +20,21 @@ properties:
>    compatible:
>      const: xlnx,zynqmp-r5fss
>  
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2
> +
> +  ranges:
> +    description: |
> +      Standard ranges definition providing address translations for
> +      local R5F TCM address spaces to bus addresses.
> +
>    xlnx,cluster-mode:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1, 2]
> +    default: 1
>      description: |
>        The RPU MPCore can operate in split mode (Dual-processor performance), Safety
>        lock-step mode(Both RPU cores execute the same code in lock-step,
> @@ -37,7 +49,7 @@ properties:
>        2: single cpu mode
>  
>  patternProperties:
> -  "^r5f-[a-f0-9]+$":
> +  "^r5f@[0-9a-f]+$":
>      type: object
>      description: |
>        The RPU is located in the Low Power Domain of the Processor Subsystem.
> @@ -54,9 +66,6 @@ patternProperties:
>        compatible:
>          const: xlnx,zynqmp-r5f
>  
> -      power-domains:
> -        maxItems: 1
> -
>        mboxes:
>          minItems: 1
>          items:
> @@ -101,35 +110,174 @@ patternProperties:
>  
>      required:
>        - compatible
> -      - power-domains
>  
> -    unevaluatedProperties: false
> +allOf:
> +  - if:
> +      properties:
> +        xlnx,cluster-mode:
> +          enum:
> +            - 1
> +    then:
> +      patternProperties:
> +        "^r5f@[0-9a-f]+$":
> +          type: object
> +
> +          properties:
> +            reg:
> +              minItems: 1
> +              items:
> +                - description: ATCM internal memory
> +                - description: BTCM internal memory
> +                - description: extra ATCM memory in lockstep mode
> +                - description: extra BTCM memory in lockstep mode
> +
> +            reg-names:
> +              minItems: 1
> +              items:
> +                - const: atcm0
> +                - const: btcm0
> +                - const: atcm1
> +                - const: btcm1
> +
> +            power-domains:
> +              minItems: 2
> +              maxItems: 5
> +
> +          required:
> +            - reg
> +            - reg-names
> +            - power-domains
> +
> +    else:
> +      patternProperties:
> +        "^r5f@[0-9a-f]+$":
> +          type: object
> +
> +          properties:
> +            reg:
> +              minItems: 1
> +              items:
> +                - description: ATCM internal memory
> +                - description: BTCM internal memory
> +
> +            reg-names:
> +              minItems: 1
> +              items:
> +                - const: atcm0
> +                - const: btcm0
> +
> +            power-domains:
> +              minItems: 2
> +              maxItems: 3
> +
> +          required:
> +            - reg
> +            - reg-names
> +            - power-domains
>  
>  required:
>    - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
>  
>  additionalProperties: false
>  
>  examples:
>    - |
> -    remoteproc {
> -        compatible = "xlnx,zynqmp-r5fss";
> -        xlnx,cluster-mode = <1>;
> -
> -        r5f-0 {
> -            compatible = "xlnx,zynqmp-r5f";
> -            power-domains = <&zynqmp_firmware 0x7>;
> -            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> -            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> -            mbox-names = "tx", "rx";
> +    #include <dt-bindings/power/xlnx-zynqmp-power.h>
> +
> +    // Split mode configuration
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        remoteproc@ffe00000 {
> +            compatible = "xlnx,zynqmp-r5fss";
> +            xlnx,cluster-mode = <0>;
> +
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> +                     <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> +                     <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
> +                     <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
> +
> +            r5f@0 {
> +                compatible = "xlnx,zynqmp-r5f";
> +                reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
> +                reg-names = "atcm0", "btcm0";
> +                power-domains = <&zynqmp_firmware PD_RPU_0>,
> +                                <&zynqmp_firmware PD_R5_0_ATCM>,
> +                                <&zynqmp_firmware PD_R5_0_BTCM>;
> +                memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
> +                                <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> +                mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> +                mbox-names = "tx", "rx";
> +            };
> +
> +            r5f@1 {
> +                compatible = "xlnx,zynqmp-r5f";
> +                reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> +                reg-names = "atcm0", "btcm0";
> +                power-domains = <&zynqmp_firmware PD_RPU_1>,
> +                                <&zynqmp_firmware PD_R5_1_ATCM>,
> +                                <&zynqmp_firmware PD_R5_1_BTCM>;
> +                memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
> +                                <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> +                mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> +                mbox-names = "tx", "rx";
> +            };
>          };
> +    };
> +
> +  - |
> +    //Lockstep configuration
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        remoteproc@ffe00000 {
> +            compatible = "xlnx,zynqmp-r5fss";
> +            xlnx,cluster-mode = <1>;
> +
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> +                     <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> +                     <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
> +                     <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
> +
> +            r5f@0 {
> +                compatible = "xlnx,zynqmp-r5f";
> +                reg = <0x0 0x0 0x0 0x10000>,
> +                      <0x0 0x20000 0x0 0x10000>,
> +                      <0x0 0x10000 0x0 0x10000>,
> +                      <0x0 0x30000 0x0 0x10000>;
> +                reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
> +                power-domains = <&zynqmp_firmware PD_RPU_0>,
> +                                <&zynqmp_firmware PD_R5_0_ATCM>,
> +                                <&zynqmp_firmware PD_R5_0_BTCM>,
> +                                <&zynqmp_firmware PD_R5_1_ATCM>,
> +                                <&zynqmp_firmware PD_R5_1_BTCM>;
> +                memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
> +                                <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> +                mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> +                mbox-names = "tx", "rx";
> +            };
>  
> -        r5f-1 {
> -            compatible = "xlnx,zynqmp-r5f";
> -            power-domains = <&zynqmp_firmware 0x8>;
> -            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> -            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> -            mbox-names = "tx", "rx";
> +            r5f@1 {
> +                compatible = "xlnx,zynqmp-r5f";
> +                reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> +                reg-names = "atcm0", "btcm0";
> +                power-domains = <&zynqmp_firmware PD_RPU_1>,
> +                                <&zynqmp_firmware PD_R5_1_ATCM>,
> +                                <&zynqmp_firmware PD_R5_1_BTCM>;
> +                memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
> +                                <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> +                mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> +                mbox-names = "tx", "rx";
> +            };
>          };
>      };
>  ...




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux