On 2/24/2024 5:37 AM, Konrad Dybcio wrote:
On 23.02.2024 15:03, Mrinmay Sarkar wrote:
Due to some hardware changes, SA8775P has set the NO_SNOOP attribute
in its TLP for all the PCIe controllers. NO_SNOOP attribute when set,
the requester is indicating that there no cache coherency issues exit
for the addressed memory on the host i.e., memory is not cached. But
in reality, requester cannot assume this unless there is a complete
control/visibility over the addressed memory on the host.
And worst case, if the memory is cached on the host, it may lead to
memory corruption issues. It should be noted that the caching of memory
on the host is not solely dependent on the NO_SNOOP attribute in TLP.
So to avoid the corruption, this patch overrides the NO_SNOOP attribute
by setting the PCIE_PARF_NO_SNOOP_OVERIDE register. This patch is not
needed for other upstream supported platforms since they do not set
NO_SNOOP attribute by default.
Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-qcom-ep.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 89d06a3e6e06..369954649254 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -45,6 +45,7 @@
#define PARF_SLV_ADDR_MSB_CTRL 0x2c0
#define PARF_DBI_BASE_ADDR 0x350
#define PARF_DBI_BASE_ADDR_HI 0x354
+#define PARF_NO_SNOOP_OVERIDE 0x3d4
Any reason for this to be unsorted?
Konrad
Yes, this should be sorted. Will fix this in next series.
Thanks
Mrinmay
