Hello Anand,
On 2024-02-27 15:58, Dragan Simic wrote:
On 2024-02-27 13:49, Anand Moon wrote:
On Tue, 27 Feb 2024 at 00:39, Dragan Simic <dsimic@xxxxxxxxxxx> wrote:
On 2024-02-26 19:23, Anand Moon wrote:
> As per RK3568 Datasheet and TRM add missing cache information to
> the Rockchip RK3566 and RK3568 SoC.
>
> - Each Cortex-A55 core has 32KB of L1 instruction cache available and
> 32KB of L1 data cache available with ECC.
> - Along with 512KB Unified L3 cache with ECC.
>
> With adding instruction cache and data cache and a write buffer to
> reduce the effect of main memory bandwidth and latency on data
> access performance.
>
> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
I was about to send my own patch that adds the same missing cache
information, so please allow me to describe the proposed way to move
forward.
The way I see it, your commit summary and description need a rather
complete rewrite, to be more readable, more accurate, and to avoid
including an irrelevant (and slightly misleading) description of the
general role of caches.
Also, the changes to the dtsi file would benefit from small touch-ups
here and there, for improved consistency, etc.
With all that in mind, I propose that you withdraw your patch and let
me send my patch that will addresses all these issues, of course with
a proper tag that lists you as a co-developer. I think that would
save us a fair amount of time going back and forth.
I hope you agree.
I have no issue with this,.If you have a better version plz share
this.
Thank you, I'll send my patch within the next couple of days.
Here's a brief update... Basically, not all of the cache-size values
found in your patch were correct, but I've got all of them calculated
again, double-checked, and cross-compared with the way values in my
earlier patch for the RK3399 SoC dtsi were calculated. [2]
It all checked out just fine. It's all based on the RK3566 and RK3568
SoC datasheets and a couple of ARM specifications, which I'll describe
in detail in my patch description. I'll send the patch after I test
it a bit, to make sure it all works as expected.
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=b72633ba5cfa932405832de25d0f0a11716903b4
