[PATCH v4 3/4] usb: dwc3-am62: Fix PHY core voltage selection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



TRM information is outdated and design team has confirmed
that PHY_CORE_VOLTAGE should be 0 irrespective of
VDD_CORE voltage.

Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx>
Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
---
Changelog:
v4: Added Acked-by
v3: no change
v2: no change
v1: https://lore.kernel.org/all/20240201121220.5523-4-rogerq@xxxxxxxxxx/
---
 drivers/usb/dwc3/dwc3-am62.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c
index ea6e29091c0c..09b1f5a1c4fb 100644
--- a/drivers/usb/dwc3/dwc3-am62.c
+++ b/drivers/usb/dwc3/dwc3-am62.c
@@ -97,7 +97,8 @@
 #define USBSS_VBUS_STAT_SESSVALID	BIT(2)
 #define USBSS_VBUS_STAT_VBUSVALID	BIT(0)
 
-/* Mask for PHY PLL REFCLK */
+/* USB_PHY_CTRL register bits in CTRL_MMR */
+#define PHY_CORE_VOLTAGE_MASK	BIT(31)
 #define PHY_PLL_REFCLK_MASK	GENMASK(3, 0)
 
 #define DWC3_AM62_AUTOSUSPEND_DELAY	100
@@ -162,6 +163,13 @@ static int phy_syscon_pll_refclk(struct dwc3_am62 *am62)
 
 	am62->offset = args.args[0];
 
+	/* Core voltage. PHY_CORE_VOLTAGE bit Recommended to be 0 always */
+	ret = regmap_update_bits(am62->syscon, am62->offset, PHY_CORE_VOLTAGE_MASK, 0);
+	if (ret) {
+		dev_err(dev, "failed to set phy core voltage\n");
+		return ret;
+	}
+
 	ret = regmap_update_bits(am62->syscon, am62->offset, PHY_PLL_REFCLK_MASK, am62->rate_code);
 	if (ret) {
 		dev_err(dev, "failed to set phy pll reference clock rate\n");

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux