On Mon, 26 Feb 2024 11:14:23 +0100, Christophe Kerello wrote: > On MP1 SoC, RNB signal (NAND controller signal) and NWAIT signal (PSRAM > controller signal) have been integrated together in the SoC. That means > that the NAND controller and the PSRAM controller (if the signal is > used) can not be used at the same time. On MP25 SoC, the 2 signals can > be used outside the SoC, so there is no more restrictions. > > MP1 SoC also embeds revision 1.1 of the FMC2 IP when MP25 SoC embeds > revision 2.0 of the FMC2 IP. > > [...] Applied, thanks! [1/5] dt-bindings: memory-controller: st,stm32: add MP25 support https://git.kernel.org/krzk/linux-mem-ctrl/c/97dcd1ef76412d0f25d2d50215565fd4d9ef91db [2/5] memory: stm32-fmc2-ebi: check regmap_read return value https://git.kernel.org/krzk/linux-mem-ctrl/c/722463f73bcf65a8c818752a38c14ee672c77da1 [3/5] memory: stm32-fmc2-ebi: add MP25 support https://git.kernel.org/krzk/linux-mem-ctrl/c/2ff761ff29f6e2d0e616b21af3e054dac1f2c5f4 [4/5] memory: stm32-fmc2-ebi: add MP25 RIF support https://git.kernel.org/krzk/linux-mem-ctrl/c/cc7d5cf8021983a736f9d963dda2dd45de02b395 [5/5] memory: stm32-fmc2-ebi: keep power domain on https://git.kernel.org/krzk/linux-mem-ctrl/c/e46076906722ee6f9e7fd5abad7f909cd11a26af Best regards, -- Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>