Hi Geert,
> -----Original Message-----
> From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Sent: Monday, February 26, 2024 7:51 PM
> Subject: Re: [PATCH v2 0/2] Enable DA9062 PMIC and built-in RTC, GPIO and
> ONKEY
>
> Hi Biju,
>
> On Mon, Feb 26, 2024 at 8:47 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> wrote:
> > This patch series aims to enable DA9062 PMIC and built-in RTC, GPIO
> > and ONKEY modules on the RZ/{G2UL,Five} SMARC EVK development boards.
>
> Thanks for your series!
>
>
> > Biju Das (2):
> > arm64: dts: renesas: rzg2ul-smarc: Enable PMIC and built-in RTC, GPIO
> > and ONKEY
> > arm64: dts: renesas: rzg2ul-smarc: [DO NOT APPLY] Add PMIC IRQ
> > property
>
> Why "[DO NOT APPLY]"?
By default PMIC IRQ is not populated on SMARC EVK's. We need to wire
the PMIC IRQ. Currently I wired PMIC IRQ's to one of the PMOD pins
to test RTC alarm and Onkey.
Note: RTC has already polling and IRQ support whereas onkey has only
IRQ support. There is a patch for supporting polling mode[1]
[1] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=819871
Cheers,
Biju
