Hi Thomas, On Mon, Feb 26, 2024 at 9:39 AM Anup Patel <apatel@xxxxxxxxxxxxxxxx> wrote: > > The RISC-V AIA specification is ratified as-per the RISC-V international > process. The latest ratified AIA specifcation can be found at: > https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf > > At a high-level, the AIA specification adds three things: > 1) AIA CSRs > - Improved local interrupt support > 2) Incoming Message Signaled Interrupt Controller (IMSIC) > - Per-HART MSI controller > - Support MSI virtualization > - Support IPI along with virtualization > 3) Advanced Platform-Level Interrupt Controller (APLIC) > - Wired interrupt controller > - In MSI-mode, converts wired interrupt into MSIs (i.e. MSI generator) > - In Direct-mode, injects external interrupts directly into HARTs > > For an overview of the AIA specification, refer the AIA virtualization > talk at KVM Forum 2022: > https://static.sched.com/hosted_files/kvmforum2022/a1/AIA_Virtualization_in_KVM_RISCV_final.pdf > https://www.youtube.com/watch?v=r071dL8Z0yo > > To test this series, use QEMU v7.2 (or higher) and OpenSBI v1.2 (or higher). > > This series depends upon per-device MSI domain (and few other) patches merged > by Thomas (tglx) which are available in irq/msi branch at: > git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git > > These patches can also be found in the riscv_aia_v15 branch at: > https://github.com/avpatel/linux.git > > Changes since v14: > - Dropped 9 patches which are already merged by Thomas (tglx) and available in > his irq/msi branch at git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git > - Added new PATCH1 which adds changes missed out in merging AIA support for > RISC-V INTC. > - Added a separate cpuhp state for IMSIC driver in PATCH3 which ensures that > cpuhp notifiers of IMSIC are called as early as possible. > - Removed redundant barriers in PATCH3. > - Addressed few other nit comments. > > Changes since v13: > - Split PATCH1 into six granular patches > - Addressed nit comments from Thomas and Bjorn > > Changes since v12: > - Rebased on Linux-6.8-rc5 > - Dropped per-device MSI domain patches which are already merged by Thomas (tglx) > - Addressed nit comments from Thomas and Clement > - Added a new patch2 to fix lock dependency warning > - Replaced local sync IPI in the IMSIC driver with per-CPU timer > - Simplified locking in the IMSIC driver to avoid lock dependency issues > - Added a dirty bitmap in the IMSIC driver to optimize per-CPU local sync loop > > Changes since v11: > - Rebased on Linux-6.8-rc1 > - Included kernel/irq related patches from "genirq, irqchip: Convert ARM > MSI handling to per device MSI domains" series by Thomas. > (PATCH7, PATCH8, PATCH9, PATCH14, PATCH16, PATCH17, PATCH18, PATCH19, > PATCH20, PATCH21, PATCH22, PATCH23, and PATCH32 of > https://lore.kernel.org/linux-arm-kernel/20221121135653.208611233@xxxxxxxxxxxxx/) > - Updated APLIC MSI-mode driver to use the new WIRED_TO_MSI mechanism. > - Updated IMSIC driver to support per-device MSI domains for PCI and > platform devices. > > Changes since v10: > - Rebased on Linux-6.6-rc7 > - Dropped PATCH3 of v10 series since this has been merged by MarcZ > for Linux-6.6-rc7 > - Changed the IMSIC ID management strategy from 1-n approach to > x86-style 1-1 approach > > Changes since v9: > - Rebased on Linux-6.6-rc4 > - Use builtin_platform_driver() in PATCH5, PATCH9, and PATCH12 > > Changes since v8: > - Rebased on Linux-6.6-rc3 > - Dropped PATCH2 of v8 series since we won't be requiring > riscv_get_intc_hartid() based on Marc Z's comments on ACPI AIA support. > - Addressed Saravana's comments in PATCH3 of v8 series > - Update PATCH9 and PATCH13 of v8 series based on comments from Sunil > > Changes since v7: > - Rebased on Linux-6.6-rc1 > - Addressed comments on PATCH1 of v7 series and split it into two PATCHes > - Use DEFINE_SIMPLE_PROP() in PATCH2 of v7 series > > Changes since v6: > - Rebased on Linux-6.5-rc4 > - Updated PATCH2 to use IS_ENABLED(CONFIG_SPARC) instead of > !IS_ENABLED(CONFIG_OF_IRQ) > - Added new PATCH4 to fix syscore registration in PLIC driver > - Update PATCH5 to convert PLIC driver into full-blown platform driver > with a re-written probe function. > > Changes since v5: > - Rebased on Linux-6.5-rc2 > - Updated the overall series to ensure that only IPI, timer, and > INTC drivers are probed very early whereas rest of the interrupt > controllers (such as PLIC, APLIC, and IMISC) are probed as > regular platform drivers. > - Renamed riscv_fw_parent_hartid() to riscv_get_intc_hartid() > - New PATCH1 to add fw_devlink support for msi-parent DT property > - New PATCH2 to ensure all INTC suppliers are initialized which in-turn > fixes the probing issue for PLIC, APLIC and IMSIC as platform driver > - New PATCH3 to use platform driver probing for PLIC > - Re-structured the IMSIC driver into two separate drivers: early and > platform. The IMSIC early driver (PATCH7) only initialized IMSIC state > and provides IPIs whereas the IMSIC platform driver (PATCH8) is probed > provides MSI domain for platform devices. > - Re-structure the APLIC platform driver into three separe sources: main, > direct mode, and MSI mode. > > Changes since v4: > - Rebased on Linux-6.5-rc1 > - Added "Dependencies" in the APLIC bindings (PATCH6 in v4) > - Dropped the PATCH6 which was changing the IOMMU DMA domain APIs > - Dropped use of IOMMU DMA APIs in the IMSIC driver (PATCH4) > > Changes since v3: > - Rebased on Linux-6.4-rc6 > - Dropped PATCH2 of v3 series instead we now set FWNODE_FLAG_BEST_EFFORT via > IRQCHIP_DECLARE() > - Extend riscv_fw_parent_hartid() to support both DT and ACPI in PATCH1 > - Extend iommu_dma_compose_msi_msg() instead of adding iommu_dma_select_msi() > in PATCH6 > - Addressed Conor's comments in PATCH3 > - Addressed Conor's and Rob's comments in PATCH7 > > Changes since v2: > - Rebased on Linux-6.4-rc1 > - Addressed Rob's comments on DT bindings patches 4 and 8. > - Addessed Marc's comments on IMSIC driver PATCH5 > - Replaced use of OF apis in APLIC and IMSIC drivers with FWNODE apis > this makes both drivers easily portable for ACPI support. This also > removes unnecessary indirection from the APLIC and IMSIC drivers. > - PATCH1 is a new patch for portability with ACPI support > - PATCH2 is a new patch to fix probing in APLIC drivers for APLIC-only systems. > - PATCH7 is a new patch which addresses the IOMMU DMA domain issues pointed > out by SiFive > > Changes since v1: > - Rebased on Linux-6.2-rc2 > - Addressed comments on IMSIC DT bindings for PATCH4 > - Use raw_spin_lock_irqsave() on ids_lock for PATCH5 > - Improved MMIO alignment checks in PATCH5 to allow MMIO regions > with holes. > - Addressed comments on APLIC DT bindings for PATCH6 > - Fixed warning splat in aplic_msi_write_msg() caused by > zeroed MSI message in PATCH7 > - Dropped DT property riscv,slow-ipi instead will have module > parameter in future. > > Anup Patel (10): > irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA > dt-bindings: interrupt-controller: Add RISC-V incoming MSI controller > irqchip: Add RISC-V incoming MSI controller early driver > irqchip/riscv-imsic: Add device MSI domain support for platform > devices > irqchip/riscv-imsic: Add device MSI domain support for PCI devices > dt-bindings: interrupt-controller: Add RISC-V advanced PLIC > irqchip: Add RISC-V advanced PLIC driver for direct-mode > irqchip/riscv-aplic: Add support for MSI-mode > RISC-V: Select APLIC and IMSIC drivers > MAINTAINERS: Add entry for RISC-V AIA drivers > > .../interrupt-controller/riscv,aplic.yaml | 172 ++++ > .../interrupt-controller/riscv,imsics.yaml | 172 ++++ > MAINTAINERS | 14 + > arch/riscv/Kconfig | 2 + > drivers/irqchip/Kconfig | 25 + > drivers/irqchip/Makefile | 3 + > drivers/irqchip/irq-riscv-aplic-direct.c | 326 +++++++ > drivers/irqchip/irq-riscv-aplic-main.c | 211 +++++ > drivers/irqchip/irq-riscv-aplic-main.h | 52 ++ > drivers/irqchip/irq-riscv-aplic-msi.c | 263 ++++++ > drivers/irqchip/irq-riscv-imsic-early.c | 201 ++++ > drivers/irqchip/irq-riscv-imsic-platform.c | 374 ++++++++ > drivers/irqchip/irq-riscv-imsic-state.c | 865 ++++++++++++++++++ > drivers/irqchip/irq-riscv-imsic-state.h | 108 +++ > drivers/irqchip/irq-riscv-intc.c | 10 +- > include/linux/cpuhotplug.h | 1 + > include/linux/irqchip/riscv-aplic.h | 145 +++ > include/linux/irqchip/riscv-imsic.h | 87 ++ > 18 files changed, 3028 insertions(+), 3 deletions(-) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml > create mode 100644 drivers/irqchip/irq-riscv-aplic-direct.c > create mode 100644 drivers/irqchip/irq-riscv-aplic-main.c > create mode 100644 drivers/irqchip/irq-riscv-aplic-main.h > create mode 100644 drivers/irqchip/irq-riscv-aplic-msi.c > create mode 100644 drivers/irqchip/irq-riscv-imsic-early.c > create mode 100644 drivers/irqchip/irq-riscv-imsic-platform.c > create mode 100644 drivers/irqchip/irq-riscv-imsic-state.c > create mode 100644 drivers/irqchip/irq-riscv-imsic-state.h > create mode 100644 include/linux/irqchip/riscv-aplic.h > create mode 100644 include/linux/irqchip/riscv-imsic.h > > -- > 2.34.1 > My email client reported "There was a problem delivering your message to tglx@xxxxxxxxxxxxx." Link to this series is https://lore.kernel.org/all/20240226040746.1396416-1-apatel@xxxxxxxxxxxxxxxx/ Let me know if you want me to re-send this series. Regards, Anup
