Add support for resetting the device using a reset controller,
complementing the existing GPIO reset functionality (reset-gpios).
Although the reset is optional and the driver performs a soft reset
during setup, if the initial reset pin state was asserted, the driver
will not detect the device until the reset is deasserted.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/net/dsa/realtek/realtek.h | 2 ++
drivers/net/dsa/realtek/rtl83xx.c | 42 ++++++++++++++++++++++++++++++++++-----
drivers/net/dsa/realtek/rtl83xx.h | 2 ++
3 files changed, 41 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
index b80bfde1ad04..e0b1aa01337b 100644
--- a/drivers/net/dsa/realtek/realtek.h
+++ b/drivers/net/dsa/realtek/realtek.h
@@ -12,6 +12,7 @@
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
#include <net/dsa.h>
+#include <linux/reset.h>
#define REALTEK_HW_STOP_DELAY 25 /* msecs */
#define REALTEK_HW_START_DELAY 100 /* msecs */
@@ -48,6 +49,7 @@ struct rtl8366_vlan_4k {
struct realtek_priv {
struct device *dev;
+ struct reset_control *reset_ctl;
struct gpio_desc *reset;
struct gpio_desc *mdc;
struct gpio_desc *mdio;
diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c
index 801873754df2..d2e876805393 100644
--- a/drivers/net/dsa/realtek/rtl83xx.c
+++ b/drivers/net/dsa/realtek/rtl83xx.c
@@ -184,6 +184,13 @@ rtl83xx_probe(struct device *dev,
"realtek,disable-leds");
/* TODO: if power is software controlled, set up any regulators here */
+ priv->reset_ctl = devm_reset_control_get_optional(dev, NULL);
+ if (IS_ERR(priv->reset_ctl)) {
+ ret = PTR_ERR(priv->reset_ctl);
+ dev_err_probe(dev, ret, "failed to get reset control\n");
+ return ERR_CAST(priv->reset_ctl);
+ }
+
priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(priv->reset)) {
dev_err(dev, "failed to get RESET GPIO\n");
@@ -192,11 +199,11 @@ rtl83xx_probe(struct device *dev,
dev_set_drvdata(dev, priv);
- if (priv->reset) {
- gpiod_set_value(priv->reset, 1);
+ if (priv->reset_ctl || priv->reset) {
+ rtl83xx_reset_assert(priv);
dev_dbg(dev, "asserted RESET\n");
msleep(REALTEK_HW_STOP_DELAY);
- gpiod_set_value(priv->reset, 0);
+ rtl83xx_reset_deassert(priv);
msleep(REALTEK_HW_START_DELAY);
dev_dbg(dev, "deasserted RESET\n");
}
@@ -292,11 +299,36 @@ EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, REALTEK_DSA);
void rtl83xx_remove(struct realtek_priv *priv)
{
/* leave the device reset asserted */
- if (priv->reset)
- gpiod_set_value(priv->reset, 1);
+ rtl83xx_reset_assert(priv);
}
EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA);
+void rtl83xx_reset_assert(struct realtek_priv *priv)
+{
+ int ret;
+
+ ret = reset_control_assert(priv->reset_ctl);
+ if (ret)
+ dev_warn(priv->dev,
+ "Failed to assert the switch reset control: %pe\n",
+ ERR_PTR(ret));
+
+ gpiod_set_value(priv->reset, true);
+}
+
+void rtl83xx_reset_deassert(struct realtek_priv *priv)
+{
+ int ret;
+
+ ret = reset_control_deassert(priv->reset_ctl);
+ if (ret)
+ dev_warn(priv->dev,
+ "Failed to deassert the switch reset control: %pe\n",
+ ERR_PTR(ret));
+
+ gpiod_set_value(priv->reset, false);
+}
+
MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx>");
MODULE_AUTHOR("Linus Walleij <linus.walleij@xxxxxxxxxx>");
MODULE_DESCRIPTION("Realtek DSA switches common module");
diff --git a/drivers/net/dsa/realtek/rtl83xx.h b/drivers/net/dsa/realtek/rtl83xx.h
index 0ddff33df6b0..c8a0ff8fd75e 100644
--- a/drivers/net/dsa/realtek/rtl83xx.h
+++ b/drivers/net/dsa/realtek/rtl83xx.h
@@ -18,5 +18,7 @@ int rtl83xx_register_switch(struct realtek_priv *priv);
void rtl83xx_unregister_switch(struct realtek_priv *priv);
void rtl83xx_shutdown(struct realtek_priv *priv);
void rtl83xx_remove(struct realtek_priv *priv);
+void rtl83xx_reset_assert(struct realtek_priv *priv);
+void rtl83xx_reset_deassert(struct realtek_priv *priv);
#endif /* _RTL83XX_H */
--
2.43.0
