On Mon, 19 Feb 2024 15:48:21 +0100 Josua Mayer <josua@xxxxxxxxxxxxx> wrote: > HDC2010 and HDC2080 humidity sensors both have an interrupt / data-ready > signal which can be used for signaling to the host. > > Add binding for "interrupts" property so that boards wiring this signal > may describe the connection. > > Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx> > Acked-by: Rob Herring <robh@xxxxxxxxxx> Applied to the togreg branch of iio.git but pushed out initially as testing so the autobuilders can have their fun. Jonathan > --- > Changes in v7: > - split out of original patchset because it should go via iio tree > - collected acked-by Rob Herring from v6 > - Link to v6: https://lore.kernel.org/r/20240212-add-am64-som-v6-0-b59edb2bc8c3@xxxxxxxxxxxxx > --- > Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > index 79e75a8675cb..e3eca8917517 100644 > --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml > @@ -27,6 +27,9 @@ properties: > reg: > maxItems: 1 > > + interrupts: > + maxItems: 1 > + > required: > - compatible > - reg > > --- > base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d > change-id: 20240219-iio-hdc20x0-interrupt-binding-42307b7b99b5 > > Best regards,
