From: Ondrej Jirman <megi@xxxxxx> This series adds support for jack detection to this codec. I used and tested this on Pinephone. It works quite nicely. I tested it against Android headset mic button resistor specification. The patches are improved and debugged version of the original ones from Arnaud Ferraris and Samuel Holland, imrpoved to better handle headset button presses and with more robust plug-in/out event debouncing. Please take a look. :) v2: - use set_jack/get_jack_type - get rid of some custom poking inside card internals to figure out what kind of jack port we should setup the codec for - read jack-type from OF as suggested here: https://elixir.bootlin.com/linux/latest/source/sound/soc/soc-component.c#L288 - add DT bindings Thank you very much, Ondřej Jirman Arnaud Ferraris (2): ASoC: sun50i-codec-analog: Enable jack detection on startup ASoC: sun8i-codec: Implement jack and accessory detection Ondrej Jirman (1): dt-bindings: sound: Add jack-type property to sun8i-a33-codec Samuel Holland (2): ASoC: sun50i-codec-analog: Move suspend/resume to set_bias_level ASoC: sun8i-codec: Enable bus clock at STANDBY and higher bias .../sound/allwinner,sun8i-a33-codec.yaml | 9 + sound/soc/sunxi/sun50i-codec-analog.c | 73 +++- sound/soc/sunxi/sun8i-codec.c | 359 +++++++++++++++++- 3 files changed, 421 insertions(+), 20 deletions(-) -- 2.43.0
