On Wed, Feb 14, 2024, Roger Quadros wrote: > All AM62 devices have Errata i2409 [1] due to which > USB2 PHY may lock up due to short suspend. > > Workaround involves setting bit 5 and 4 PLL_REG12 > in PHY2 register space after USB controller is brought > out of LPSC reset but before controller initialization. > > Handle this workaround. > > [1] - https://urldefense.com/v3/__https://www.ti.com/lit/er/sprz487d/sprz487d.pdf__;!!A4F2R9G_pg!djrhB3gW9q9ZBzv7_15MDrMqxOeQuOMbrceRs6NsnAzMMrENAGLMrt-zvq5avRei9uC6r3x9kItwobKxn2Vw$ > > Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx> > --- > Changelog: > > v3: > - move requesting of PHY2 region to right where we need it > > v2: > - don't add phy read/write helpers or add phy to private data > https://urldefense.com/v3/__https://lore.kernel.org/all/20240205141221.56076-5-rogerq@xxxxxxxxxx/__;!!A4F2R9G_pg!djrhB3gW9q9ZBzv7_15MDrMqxOeQuOMbrceRs6NsnAzMMrENAGLMrt-zvq5avRei9uC6r3x9kItwobI0OZD1$ > > v1: https://urldefense.com/v3/__https://lore.kernel.org/all/20240201121220.5523-5-rogerq@xxxxxxxxxx/__;!!A4F2R9G_pg!djrhB3gW9q9ZBzv7_15MDrMqxOeQuOMbrceRs6NsnAzMMrENAGLMrt-zvq5avRei9uC6r3x9kItwofeJSsi1$ > --- > drivers/usb/dwc3/dwc3-am62.c | 19 ++++++++++++++++++- > 1 file changed, 18 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c > index af1ce934e7fb..163278050595 100644 > --- a/drivers/usb/dwc3/dwc3-am62.c > +++ b/drivers/usb/dwc3/dwc3-am62.c > @@ -101,6 +101,11 @@ > #define PHY_CORE_VOLTAGE_MASK BIT(31) > #define PHY_PLL_REFCLK_MASK GENMASK(3, 0) > > +/* USB PHY2 register offsets */ > +#define USB_PHY_PLL_REG12 0x130 > +#define USB_PHY_PLL_LDO_REF_EN BIT(5) > +#define USB_PHY_PLL_LDO_REF_EN_EN BIT(4) > + > #define DWC3_AM62_AUTOSUSPEND_DELAY 100 > > struct dwc3_am62 { > @@ -184,8 +189,9 @@ static int dwc3_ti_probe(struct platform_device *pdev) > struct device *dev = &pdev->dev; > struct device_node *node = pdev->dev.of_node; > struct dwc3_am62 *am62; > - int i, ret; > unsigned long rate; > + void __iomem *phy; > + int i, ret; > u32 reg; > > am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL); > @@ -227,6 +233,17 @@ static int dwc3_ti_probe(struct platform_device *pdev) > if (ret) > return ret; > > + /* Workaround Errata i2409 */ > + phy = devm_platform_ioremap_resource(pdev, 1); > + if (IS_ERR(phy)) { > + dev_err(dev, "can't map PHY IOMEM resource. Won't apply i2409 fix.\n"); > + phy = NULL; > + } else { > + reg = readl(phy + USB_PHY_PLL_REG12); > + reg |= USB_PHY_PLL_LDO_REF_EN | USB_PHY_PLL_LDO_REF_EN_EN; > + writel(reg, phy + USB_PHY_PLL_REG12); > + } > + > /* VBUS divider select */ > am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); > reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG); > > -- > 2.34.1 > Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> BR, Thinh