Add sama7g5 flexcom specific compatible in DT with fallbacks.
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/microchip/sama7g5.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..6496a4ca376f 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -698,7 +698,7 @@ sha: crypto@e1814000 {
};
flx0: flexcom@e1818000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe1818000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
#address-cells = <1>;
@@ -723,7 +723,7 @@ uart0: serial@200 {
};
flx1: flexcom@e181c000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe181c000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
#address-cells = <1>;
@@ -747,7 +747,7 @@ i2c1: i2c@600 {
};
flx3: flexcom@e1824000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe1824000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
#address-cells = <1>;
@@ -791,7 +791,7 @@ tdes: crypto@e2014000 {
};
flx4: flexcom@e2018000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2018000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
#address-cells = <1>;
@@ -817,7 +817,7 @@ uart4: serial@200 {
};
flx7: flexcom@e2024000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2024000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
#address-cells = <1>;
@@ -911,7 +911,7 @@ tcb0: timer@e2814000 {
};
flx8: flexcom@e2818000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2818000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
#address-cells = <1>;
@@ -935,7 +935,7 @@ i2c8: i2c@600 {
};
flx9: flexcom@e281c000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe281c000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
#address-cells = <1>;
@@ -959,7 +959,7 @@ i2c9: i2c@600 {
};
flx11: flexcom@e2824000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe2824000 0x200>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
#address-cells = <1>;
--
2.25.1
