The hdmi@3d node's compatible string is "adi,adv7535" instead of "adi,adv7533" or "adi,adv751*". Fix the hdmi@3d node by means of: * Use default register addresses for "cec", "edid" and "packet", because there is no need to use a non-default address map. * Add missing interrupt related properties. * Drop "adi,input-*" properties which are only valid for adv751*. * Add VEXT_3V3 fixed regulator. * Add "*-supply" properties, since most are required. * Fix label names - s/adv7533/adv7535/. Fixes: 65344b9bed3a ("arm64: dts: imx8mp-evk: Add HDMI support") Signed-off-by: Liu Ying <victor.liu@xxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 33 +++++++++++++------- 1 file changed, 21 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index f87fa5a948cc..9beba8d6a0df 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -23,7 +23,7 @@ hdmi-connector { port { hdmi_connector_in: endpoint { - remote-endpoint = <&adv7533_out>; + remote-endpoint = <&adv7535_out>; }; }; }; @@ -107,6 +107,13 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; + reg_vext_3v3: regulator-vext-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VEXT_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "wm8960-audio"; @@ -364,7 +371,7 @@ BUCK4 { regulator-always-on; }; - BUCK5 { + reg_buck5: BUCK5 { regulator-name = "BUCK5"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1950000>; @@ -415,14 +422,16 @@ &i2c2 { hdmi@3d { compatible = "adi,adv7535"; - reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; - reg-names = "main", "cec", "edid", "packet"; + reg = <0x3d>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; + avdd-supply = <®_buck5>; + dvdd-supply = <®_buck5>; + pvdd-supply = <®_buck5>; + a2vdd-supply = <®_buck5>; + v3p3-supply = <®_vext_3v3>; + v1p2-supply = <®_buck5>; ports { #address-cells = <1>; @@ -431,7 +440,7 @@ ports { port@0 { reg = <0>; - adv7533_in: endpoint { + adv7535_in: endpoint { remote-endpoint = <&dsi_out>; }; }; @@ -439,7 +448,7 @@ adv7533_in: endpoint { port@1 { reg = <1>; - adv7533_out: endpoint { + adv7535_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; @@ -524,7 +533,7 @@ port@1 { reg = <1>; dsi_out: endpoint { - remote-endpoint = <&adv7533_in>; + remote-endpoint = <&adv7535_in>; data-lanes = <1 2 3 4>; }; }; -- 2.37.1