Include the PMIC dedicated file and add regulators to each one of
those 3 eUSB2 repeaters. Tie up the repeaters to their corresponding
USB HS PHY.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 6a0a54532e5f..41078889969d 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
/ {
model = "Qualcomm Technologies, Inc. X1E80100 CRD";
@@ -680,6 +681,21 @@ &remoteproc_cdsp {
status = "okay";
};
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l8b_3p0>;
+};
+
&swr0 {
status = "okay";
@@ -817,6 +833,8 @@ &usb_1_ss0_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_0_eusb2_repeater>;
+
status = "okay";
};
@@ -837,6 +855,8 @@ &usb_1_ss1_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_1_eusb2_repeater>;
+
status = "okay";
};
@@ -857,6 +877,8 @@ &usb_1_ss2_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
+ phys = <&smb2360_2_eusb2_repeater>;
+
status = "okay";
};
--
2.34.1
