Re: [PATCH V5 5/6] arm64: dts: imx8mp: add HDMI display pipeline

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Adam,

On Sat, 17 Feb 2024 22:16:43 -0600
Adam Ford <aford173@xxxxxxxxx> wrote:

> From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> 
> This adds the DT nodes for all the peripherals that make up the
> HDMI display pipeline.
> 
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> Tested-by: Marek Vasut <marex@xxxxxxx>
> Tested-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
> ---
> V5:  No change
> 
> V3:  Re-ordered the HDMI parts to properly come after irqstree_hdmi
>      inside AIPS4.  Change size of LCDIF3 and PVI to match TRM sizes
>      of 4KB.
> 
> V2:  I took this from Lucas' original submission with the following:
>      Removed extra clock from HDMI-TX since it is now part of the
>      power domain
>      Added interrupt-parent to PVI
>      Changed the name of the HDMI tranmitter to fsl,imx8mp-hdmi-tx
>      Added ports to HDMI-tx
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 94 +++++++++++++++++++++++
>  1 file changed, 94 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index cbb15ded4a74..433ea4ae6a16 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1940,6 +1940,100 @@ irqsteer_hdmi: interrupt-controller@32fc2000 {
>  				clock-names = "ipg";
>  				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
>  			};
> +
> +			hdmi_pvi: display-bridge@32fc4000 {
> +				compatible = "fsl,imx8mp-hdmi-pvi";
> +				reg = <0x32fc4000 0x1000>;
> +				interrupt-parent = <&irqsteer_hdmi>;
> +				interrupts = <12>;
> +				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;

After a small annoyance in my testing I realized here there should be:

  status = "disabled";

> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						pvi_from_lcdif3: endpoint {
> +							remote-endpoint = <&lcdif3_to_pvi>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						pvi_to_hdmi_tx: endpoint {
> +							remote-endpoint = <&hdmi_tx_from_pvi>;
> +						};
> +					};
> +				};
> +			};
> +
> +			lcdif3: display-controller@32fc6000 {
> +				compatible = "fsl,imx8mp-lcdif";
> +				reg = <0x32fc6000 0x1000>;
> +				interrupt-parent = <&irqsteer_hdmi>;
> +				interrupts = <8>;
> +				clocks = <&hdmi_tx_phy>,
> +					 <&clk IMX8MP_CLK_HDMI_APB>,
> +					 <&clk IMX8MP_CLK_HDMI_ROOT>;
> +				clock-names = "pix", "axi", "disp_axi";
> +				power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;

Here as well:

  status = "disabled";

With those fixed you can add my:

 Reviewed-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux