> > From: Daniel Danzberger <dd@xxxxxxxxxx>
> >
> > Introduce the Airoha EN7581 SoC's dtsi and the Airoha EN7581 Evaluation
> > Board's dts file, as well as the required Makefiles.
> >
> > Signed-off-by: Daniel Danzberger <dd@xxxxxxxxxx>
> > Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/Makefile | 1 +
> > arch/arm64/boot/dts/airoha/Makefile | 2 +
> > arch/arm64/boot/dts/airoha/en7581-evb.dts | 27 +++++
> > arch/arm64/boot/dts/airoha/en7581.dtsi | 137 ++++++++++++++++++++++
> > 4 files changed, 167 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/airoha/Makefile
> > create mode 100644 arch/arm64/boot/dts/airoha/en7581-evb.dts
> > create mode 100644 arch/arm64/boot/dts/airoha/en7581.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> > index 30dd6347a929..21cd3a87f385 100644
> > --- a/arch/arm64/boot/dts/Makefile
> > +++ b/arch/arm64/boot/dts/Makefile
> > @@ -1,5 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0
> > subdir-y += actions
> > +subdir-y += airoha
> > subdir-y += allwinner
> > subdir-y += altera
> > subdir-y += amazon
> > diff --git a/arch/arm64/boot/dts/airoha/Makefile b/arch/arm64/boot/dts/airoha/Makefile
> > new file mode 100644
> > index 000000000000..ebea112ce1d7
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/airoha/Makefile
> > @@ -0,0 +1,2 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb
> > diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts
> > new file mode 100644
> > index 000000000000..4eaa8ac431c3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts
> > @@ -0,0 +1,27 @@
> > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +/dts-v1/;
> > +
> > +/* Bootloader installs ATF here */
> > +/memreserve/ 0x80000000 0x200000;
> > +
> > +#include "en7581.dtsi"
> > +
> > +/ {
> > + model = "Airoha EN7581 Evaluation Board";
> > + compatible = "airoha,en7581-evb", "airoha,en7581";
> > +
> > + aliases {
> > + serial0 = &uart1;
> > + };
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,115200 earlycon";
> > + stdout-path = "serial0:115200n8";
> > + linux,usable-memory-range = <0x0 0x80200000 0x0 0x1fe00000>;
> > + };
> > +
> > + memory@80000000 {
> > + device_type = "memory";
> > + reg = <0x0 0x80000000 0x2 0x00000000>;
>
> Is your bootloader really not filling the size for the memory node?
is the size 0x200000000? Am I missing something?
>
> Can you please verify?
> If it doesn't, it's not a problem of course.
>
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
> > new file mode 100644
> > index 000000000000..7a3c0a45c03f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
> > @@ -0,0 +1,137 @@
> > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +/ {
> > + interrupt-parent = <&gic>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + npu_binary@84000000 {
>
> npu-binary@...
ack, I will fix it.
>
> > + no-map;
> > + reg = <0x0 0x84000000 0x0 0xA00000>;
> > + };
> > +
> > + npu_flag@84B0000 {
> > + no-map;
> > + reg = <0x0 0x84B00000 0x0 0x100000>;
> > + };
> > +
> > + npu_pkt@85000000 {
> > + no-map;
> > + reg = <0x0 0x85000000 0x0 0x1A00000>;
> > + };
> > +
> > + npu_phyaddr@86B00000 {
> > + no-map;
> > + reg = <0x0 0x86B00000 0x0 0x100000>;
> > + };
> > +
> > + npu_rxdesc@86D00000 {
> > + no-map;
> > + reg = <0x0 0x86D00000 0x0 0x100000>;
> > + };
> > + };
> > +
> > + psci {
> > + compatible = "arm,psci-0.2";
>
> Not the first time I comment that (in general - not specifically to you): are you
> sure that your platform supports PSCI v0.2 and not a later version?
>
> Please check your kernel log, you should see a message like
>
> [ 0.000000] psci: PSCIv1.1 detected in firmware.
>
> (with the right version)
>
> ...then use the right compatible string :-)
ack, I will fix it.
>
> > + method = "smc";
> > + };
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu-map {
> > + cluster0 {
> > + core0 {
> > + cpu = <&cpu0>;
> > + };
> > + core1 {
> > + cpu = <&cpu1>;
> > + };
>
> Your cluster contains only two cores, this means that the other two are in a
> parallel reality? :-P :-P
I think this has been copied from vendor sdk. I will fix moving back 2 missing
cpu from the 'parallel reality' :)
>
> Jokes apart, this cpu-map looks wrong.
>
> Check what the topology is supposed to be for real, clusterized or DynamIQ?
> In the first case, you get X clusters with Y CPUs each - in the second case,
> you get *one* single cluster with all CPUs inside.
I think it is just a linear architecture, but I will check with airoha folks.
>
> > + };
> > + };
> > +
> > + cpu0: cpu@0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x0>;
> > + enable-method = "psci";
> > + clock-frequency = <80000000>;
> > + next-level-cache = <&L2_0>;
> > + };
> > +
> > + cpu1: cpu@1 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x1>;
> > + enable-method = "psci";
> > + clock-frequency = <80000000>;
> > + next-level-cache = <&L2_0>;
> > + };
> > +
> > + cpu2: cpu@2 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x2>;
> > + enable-method = "psci";
> > + clock-frequency = <80000000>;
> > + next-level-cache = <&L2_0>;
> > + };
> > +
> > + cpu3: cpu@3 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x3>;
> > + enable-method = "psci";
> > + clock-frequency = <80000000>;
> > + next-level-cache = <&L2_0>;
> > + };
> > +
> > + L2_0: l2-cache0 {
> > + compatible = "cache";
> > + cache-level = <2>;
> > + cache-unified;
>
> Do you know what is the l2 cache size, line size, sets?
> cache-size = < ... >
> cache-line-size = < ... >
> cache-sets = < ... >
not sure about them, I will sync with airoha folks.
>
> > + };
> > + };
> > +
>
> All iospace addressable nodes must go into a soc node, others go in the root node.
ack, I will fix it.
>
> soc {
> gic: interrupt-controller@9000000 {
> ....
> }
>
> uart0: serial@ ....
>
> };
>
> > + gic: interrupt-controller@9000000 {
> > + compatible = "arm,gic-v3";
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + reg = <0x0 0x09000000 0x0 0x20000>,
> > + <0x0 0x09080000 0x0 0x80000>,
> > + <0x0 0x09400000 0x0 0x2000>,
> > + <0x0 0x09500000 0x0 0x2000>,
> > + <0x0 0x09600000 0x0 0x20000>;
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + uart1: serial@1fbf0000 {
> > + compatible = "ns16550";
> > + reg = <0x0 0x1fbf0000 0x0 0x30>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> > + clock-frequency = <1843200>;
> > + status = "okay";
>
> status is okay by default, you don't need that.
ack, I will fix it.
Regards,
Lorenzo
>
> > + };
> > +};
>
> Cheers,
> Angelo
Attachment:
signature.asc
Description: PGP signature
