Hello, This series extends the current ICSSG-based Ethernet driver to support AM65x Silicon Revision 1.0 devices. Notable differences between the Silicon Revisions are that there is no TX core in SR1.0 with this being handled by the firmware, requiring extra DMA channels to manage communication with the firmware (with the firmware being different as well) and in the packet classifier. The motivation behind it is that a significant number of Siemens devices containing SR1.0 silicon have been deployed in the field and need to be supported and updated to newer kernel versions without losing functionality. This series is based on TI's 5.10 SDK [1]. The second version of this patch series can be found in [2]. The main changes in this version are the introduction of a separate driver for SR1.0 with its own Kconfig symbol and the refactoring of functions that can be shared across Silicon Revisions into a common location. A more detailed description of the changes can be found in each commit's message. Importantly, in its current form the driver has two problems: - Setting the link to 100Mbit/s and half duplex results in slower than expected speeds. We have identified that this comes from icssg_rgmii_get_fullduplex() misreporting a full duplex connection and thus we send the wrong command to the firmware. - When using 3 TX channels we observe a timeout on TX queue 0. We have made no real progress on this front in identifying the root cause. For both of these topics help from someone more familiar with the hardware would be greatly appreciated so that we can support these features rather than disable them in the final driver version. [1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y [2]: https://lore.kernel.org/netdev/20240117161602.153233-1-diogo.ivo@xxxxxxxxxxx/ Diogo Ivo (10): dt-bindings: net: Add support for AM65x SR1.0 in ICSSG eth: Move IPv4/IPv6 multicast address bases to their own symbols net: ti: icssg-prueth: Move common functions into a separate file net: ti: icssg-prueth: Add SR1.0-specific configuration bits net: ti: icssg-prueth: Add SR1.0-specific description bits net: ti: icssg-prueth: Adjust IPG configuration for SR1.0 net: ti: icssg-prueth: Adjust the number of TX channels for SR1.0 net: ti: icssg-prueth: Add functions to configure SR1.0 packet classifier net: ti: icssg-prueth: Modify common functions for SR1.0 net: ti: icssg-prueth: Add ICSSG Ethernet driver for AM65x SR1.0 platforms .../bindings/net/ti,icssg-prueth.yaml | 35 +- drivers/net/ethernet/ti/Kconfig | 15 + drivers/net/ethernet/ti/Makefile | 9 + .../net/ethernet/ti/icssg/icssg_classifier.c | 113 +- drivers/net/ethernet/ti/icssg/icssg_common.c | 1222 +++++++++++++++++ drivers/net/ethernet/ti/icssg/icssg_config.c | 14 +- drivers/net/ethernet/ti/icssg/icssg_config.h | 56 + drivers/net/ethernet/ti/icssg/icssg_ethtool.c | 10 + drivers/net/ethernet/ti/icssg/icssg_prueth.c | 1189 +--------------- drivers/net/ethernet/ti/icssg/icssg_prueth.h | 77 +- .../net/ethernet/ti/icssg/icssg_prueth_sr1.c | 1173 ++++++++++++++++ include/linux/etherdevice.h | 12 +- 12 files changed, 2716 insertions(+), 1209 deletions(-) create mode 100644 drivers/net/ethernet/ti/icssg/icssg_common.c create mode 100644 drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c -- 2.43.2
