Re: [PATCH v14 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sandor,

Am Mittwoch, 21. Februar 2024, 08:47:52 CET schrieb Sandor Yu:
> Hi Alexander,
> 
> Thanks for your comments,
> 
> >
> > Hi,
> >
> > thanks for the update.
> >
> > Am Dienstag, 20. Februar 2024, 04:23:55 CET schrieb Sandor Yu:
> > > Add Cadence HDP-TX HDMI PHY driver for i.MX8MQ.
> > >
> > > Cadence HDP-TX PHY could be put in either DP mode or HDMI mode base
> > on
> > > the configuration chosen.
> > > HDMI PHY mode is configurated in the driver.
> > >
> > > Signed-off-by: Sandor Yu <Sandor.yu@xxxxxxx>
> > > Tested-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> >
> > This still works as before. I noticed there is a lot of code duplication with
> > patch 6. IMHO these PHY drivers should be merged into a single one where
> > the mode is configured using phy_set_mode() from cdns-mhdp8501-core.c.
> > This nicely matches my concerns regarding patch 5.
> >
> Yes, there are some registers offset are same and the clock management function could be reused for DP and HDMI PHY driver.
> But because of HDMI and DP PHY totally different work mode, the functions in struct phy_ops,
> Such as ->init, ->power_on/off and ->configure could not combine into a single one,
> So separate DP and HDMI PHY driver should be a better resolution.

Despite some output type (DP/HDMI) specific settings, the similarities
are quite huge actually. Even though apparently DP has it's own ->init setup,
this can be delayed until ->set_mode or even ->configure.
The distinction between each mode can be done by checking phy->attrs.mode.
For a prove of concept I've hacked both drivers into a single one. I can't
test DP, but HDMI still works. Feel free to contact me in private.

Best regards,
Alexander

> B.R
> Sandor
> 
> 
> > Best regards,
> > Alexander
> >
> > > ---
> > > v13->v14:
> > >  *No change.
> > >
> > > v12->v13:
> > > - Fix build warning
> > >
> > > v11->v12:
> > > - Adjust clk disable order.
> > > - Return error code to replace -1 for function wait_for_ack().
> > > - Use bool for variable pclk_in.
> > > - Add year 2024 to copyright.
> > >
> > >  drivers/phy/freescale/Kconfig               |  10 +
> > >  drivers/phy/freescale/Makefile              |   1 +
> > >  drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c | 960
> > > ++++++++++++++++++++
> > >  3 files changed, 971 insertions(+)
> > >  create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c
> > >
> > > diff --git a/drivers/phy/freescale/Kconfig
> > > b/drivers/phy/freescale/Kconfig index c39709fd700ac..14f47b7cc77ab
> > > 100644
> > > --- a/drivers/phy/freescale/Kconfig
> > > +++ b/drivers/phy/freescale/Kconfig

> [snip]

-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux