Il 21/02/24 08:35, Rafał Miłecki ha scritto:
From: Rafał Miłecki <rafal@xxxxxxxxxx> Cudy WR3000 V1 is an MT7981B (AKA Filogic 820) based wireless router. It has 256 MiB of RAM, some LEDs & buttons and (not described yet) 4 Ethernet ports. Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx> --- arch/arm64/boot/dts/mediatek/Makefile | 1 + .../dts/mediatek/mt7981b-cudy-wr3000-v1.dts | 74 +++++++++++++++++++ 2 files changed, 75 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 37b4ca3a87c9..96da4ad640aa 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-cudy-wr3000-v1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts new file mode 100644 index 000000000000..cb36a089518a --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +#include "mt7981b.dtsi" + +/ { + compatible = "cudy,wr3000-v1", "mediatek,mt7981b"; + model = "Cudy WR3000 V1"; + + memory@40000000 { + reg = <0 0x40000000 0 0x10000000>; + device_type = "memory"; + }; + + keys { + compatible = "gpio-keys"; + + key-wps { + label = "WPS"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + key-reset { + label = "RESET"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 5 GPIO_ACTIVE_LOW>;
Can we please order those properties alphabetically, as it doesn't impact on human readability in any way? Just a nitpick, anyway. color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_WAN; gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+ }; + + led-1 { + function = LED_FUNCTION_WLAN_2GHZ; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-2 { + function = LED_FUNCTION_WLAN_5GHZ; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + function = "online";
Uhm, what does "online" mean? Are you sure that you can't use any of the LED_FUNCTION_XXX standard definitions? Cheers, Angelo