On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge for each controller instance. Hence, add a node to represent the bridge. While at it, let's remove the bridge properties from board dts as they are now redundant. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 8 ----- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++ 2 files changed, 40 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index def3976bd5bb..f0a0115e08fa 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -733,14 +733,6 @@ &pcie4 { status = "okay"; pcie@0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - bus-range = <0x01 0xff>; - wifi@0 { compatible = "pci17cb,1103"; reg = <0x10000 0x0 0x0 0x0 0x0>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index febf28356ff8..37d9e01d7e4e 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -1779,6 +1779,16 @@ pcie4: pcie@1c00000 { phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie4_phy: phy@1c06000 { @@ -1877,6 +1887,16 @@ pcie3b: pcie@1c08000 { phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie3b_phy: phy@1c0e000 { @@ -1975,6 +1995,16 @@ pcie3a: pcie@1c10000 { phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie3a_phy: phy@1c14000 { @@ -2076,6 +2106,16 @@ pcie2b: pcie@1c18000 { phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie2b_phy: phy@1c1e000 { -- 2.25.1