Re: [RFC PATCH 5/6] arm64: dts: qcom: add base AIM500 dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 20 Feb 2024 at 11:17, Jingyi Wang <quic_jingyw@xxxxxxxxxxx> wrote:
>
> Hi Dmitry,
>
> On 2/5/2024 10:23 PM, Dmitry Baryshkov wrote:
> > On Mon, 5 Feb 2024 at 14:00, Jingyi Wang <quic_jingyw@xxxxxxxxxxx> wrote:
> >>
> >> Introduce aim500 board dtsi.
> >
> > So, is it a board or a module?
> >
> aim500 is a module, will fix the descrption.
>
> >>
> >> AIM500 Series is a highly optimized family of modules designed to
> >> support AIoT and Generative AI applications based on sm8650p with
> >> PMIC and bluetooth functions etc.
> >>
> >> Co-developed-by: Tingwei Zhang <quic_tingweiz@xxxxxxxxxxx>
> >> Signed-off-by: Tingwei Zhang <quic_tingweiz@xxxxxxxxxxx>
> >> Signed-off-by: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
> >> ---
> >>  arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi | 409 +++++++++++++++++++
> >>  1 file changed, 409 insertions(+)
> >>  create mode 100644 arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi b/arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi
> >> new file mode 100644
> >> index 000000000000..cb857da8653b
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi
> >> @@ -0,0 +1,409 @@
> >> +// SPDX-License-Identifier: BSD-3-Clause
> >> +/*
> >> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
> >> + */
> >> +
> >> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> >> +#include "sm8650p.dtsi"
> >> +#include "pm8550.dtsi"
> >> +#include "pm8550b.dtsi"
> >> +#define PMK8550VE_SID 8
> >> +#include "pm8550ve.dtsi"
> >> +#include "pm8550vs.dtsi"
> >> +#include "pmk8550.dtsi"
> >> +
> >> +/ {
> >> +       aliases {
> >> +               serial1 = &uart14;
> >> +       };
> >> +
> >> +       vph_pwr: vph-pwr-regulator { };
> >
> > Is this regulator a part of the module or a part of the carrier board?
> > If the latter is true, this must go to the carrier board DT file.
> >
>
> the vph_pwr regulator is defined in the aim500-aiot carrier board and used
> in aim500 module.

If it is defined in the carrier board, then please move it and
corresponding supply entries to the carrier board dts. Other devices
using the SoM can have different power tree.

While we are at it, could you please rename the node to regulator-vph-pwr?


-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux