From: Yang Xiwen <forbidden405@xxxxxxxxxxx> Compared to previous txt based binding doc, the following changes are made according to the TRM: - Remove unmaintained Hi3516 SoC, add Hi3798MV200 - add MDIO subnode, because MDIO bus is integrated - add ahb bus clock, phy clock and reset Also remove "hisi-femac-v1/2" binding. The difference between versions is unknown and not documented anywhere. Nor is it used in driver. Remove it until it's needed in the future. Signed-off-by: Yang Xiwen <forbidden405@xxxxxxxxxxx> --- .../bindings/net/hisilicon,hisi-femac.yaml | 117 +++++++++++++++++++++ 1 file changed, 117 insertions(+) diff --git a/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml new file mode 100644 index 000000000000..08158118c9c4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/hisilicon,hisi-femac.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/hisilicon,hisi-femac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Fast Ethernet MAC controller + +maintainers: + - Yang Xiwen <forbidden405@xxxxxxxxxxx> + +allOf: + - $ref: ethernet-controller.yaml + +properties: + compatible: + items: + - enum: + - hisilicon,hi3798mv200-femac + - const: hisilicon,hisi-femac + + reg: + items: + - description: The first region is the MAC core register base and size. + - description: The second region is the global MAC control register. + + ranges: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: mac + - const: macif + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: mac + - const: phy + + hisilicon,phy-reset-delays-us: + items: + - description: The 1st cell is reset pre-delay in micro seconds. + - description: The 2nd cell is reset pulse in micro seconds. + - description: The 3rd cell is reset post-delay in micro seconds. + +patternProperties: + '^mdio@[0-9a-f]+$': + $ref: hisilicon,hisi-femac-mdio.yaml# + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - phy-connection-type + - phy-handle + - hisilicon,phy-reset-delays-us + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/histb-clock.h> + + ethernet@9c30000 { + compatible = "hisilicon,hi3798mv200-femac", "hisilicon,hisi-femac"; + reg = <0x9c30000 0x1000>, <0x9c31300 0x200>; + ranges = <0x0 0x9c30000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_ETH0_MAC_CLK>, + <&crg HISTB_ETH0_MACIF_CLK>, + <&crg 62>; + clock-names = "mac", "macif", "phy"; + resets = <&crg 0xd0 3>, <&crg 0x388 4>; + reset-names = "mac", "phy"; + phy-handle = <&fephy>; + phy-connection-type = "mii"; + // To be filled by bootloader + mac-address = [00 00 00 00 00 00]; + hisilicon,phy-reset-delays-us = <10000 10000 500000>; + status = "okay"; + + mdio@1100 { + compatible = "hisilicon,hisi-femac-mdio"; + reg = <0x1100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + }; -- 2.43.0
