From: Maksim Kiselev <bigunclemax@xxxxxxxxx> The H616 SoC resembles the H6 thermal sensor controller, with a few changes like four sensors. Extend sun50i_h6_ths_calibrate() function to support calibration of these sensors. Co-developed-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx> Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx> Signed-off-by: Maksim Kiselev <bigunclemax@xxxxxxxxx> Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> Reviewed-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx> --- drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c index 42bee03c4e507..c919b0fd5e169 100644 --- a/drivers/thermal/sun8i_thermal.c +++ b/drivers/thermal/sun8i_thermal.c @@ -222,16 +222,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev, struct device *dev = tmdev->dev; int i, ft_temp; - if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) + if (!caldata[0]) return -EINVAL; /* * efuse layout: * - * 0 11 16 32 - * +-------+-------+-------+ - * |temp| |sensor0|sensor1| - * +-------+-------+-------+ + * 0 11 16 27 32 43 48 57 + * +----------+-----------+-----------+-----------+ + * | temp | |sensor0| |sensor1| |sensor2| | + * +----------+-----------+-----------+-----------+ + * ^ ^ ^ + * | | | + * | | sensor3[11:8] + * | sensor3[7:4] + * sensor3[3:0] * * The calibration data on the H6 is the ambient temperature and * sensor values that are filled during the factory test stage. @@ -244,9 +249,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev, ft_temp = (caldata[0] & FT_TEMP_MASK) * 100; for (i = 0; i < tmdev->chip->sensor_num; i++) { - int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; - int cdata, offset; - int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); + int sensor_reg, sensor_temp, cdata, offset; + + if (i == 3) + sensor_reg = (caldata[1] >> 12) + | ((caldata[2] >> 12) << 4) + | ((caldata[3] >> 12) << 8); + else + sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK; + + sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg); /* * Calibration data is CALIBRATE_DEFAULT - (calculated -- 2.25.1