Re: [PATCH v10 00/14] PCI: imx6: Clean up and add imx95 pci support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 19, 2024 at 04:21:26PM +0100, Lorenzo Pieralisi wrote:
> On Mon, Feb 19, 2024 at 10:11:45AM -0500, Frank Li wrote:
> > On Mon, Feb 05, 2024 at 12:33:21PM -0500, Frank Li wrote:
> > > first 6 patches use drvdata: flags to simplify some switch-case code.
> > > Improve maintaince and easy to read code.
> > > 
> > 
> > @Lorenzo Pieralisi:
> > 
> > 	Do you have chance to look other patches?
> 
> Yes, they are fine.
> 
> > 	Mani's apply EP side change. 
> > 	'PCI: imx6: Add iMX95 Endpoint (EP) support' need be rebased. 
> 
> What does that mean ? I think it is best to pull the series in a single
> branch if there are not any dependencies on other branches.

Two options:

Options 1:
	Merge 1-13. Left 'PCI: imx6: Add iMX95 Endpoint (EP) support'.
I will send out later with other clean up patches.

Options 2:
	I rebase to https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/log/?h=endpoint
	After Bjorn Helgaas merge to next, you can pick all.

I perfer opitons 1.

Frank

> 
> Thanks,
> Lorenzo
> 
> > Frank
> > 
> > > Then add imx95 basic pci host function.
> > > 
> > > follow two patch do endpoint code clean up.
> > > Then add imx95 basic endpont function.
> > > 
> > > Compared with v2, added EP function support and some fixes,  please change
> > > notes at each patches.
> > > 
> > > Change from v9 to v10
> > > - remove two patches:
> > > >   dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ
> > > >   PCI: imx6: Using "linux,pci-domain" as slot ID
> > > it is not good solution to fixed hardcode check to get controller id.
> > > Will see better solution later.
> > > 
> > > dt-binding pass pcie node:
> > > 
> > > pcie0: pcie@4c300000 {
> > >                         compatible = "fsl,imx95-pcie";
> > >                         reg = <0 0x4c300000 0 0x40000>,
> > >                                 <0 0x4c360000 0 0x10000>,
> > >                                 <0 0x4c340000 0 0x20000>,
> > >                                 <0 0x60100000 0 0xfe00000>;
> > >                         reg-names = "dbi", "atu", "app", "config";
> > >                         #address-cells = <3>;
> > >                         #size-cells = <2>;
> > >                         device_type = "pci";
> > >                         linux,pci-domain = <0>;
> > >                         bus-range = <0x00 0xff>;
> > >                         ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
> > >                                  <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
> > >                         num-lanes = <1>;
> > >                         num-viewport = <8>;
> > >                         interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
> > >                         interrupt-names = "msi";
> > >                         #interrupt-cells = <1>;
> > >                         interrupt-map-mask = <0 0 0 0x7>;
> > >                         interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
> > >                                         <0 0 0 2 &gic 0 0 GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
> > >                                         <0 0 0 3 &gic 0 0 GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> > >                                         <0 0 0 4 &gic 0 0 GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
> > >                         fsl,max-link-speed = <3>;
> > >                         clocks = <&scmi_clk IMX95_CLK_HSIO>,
> > >                                  <&scmi_clk IMX95_CLK_HSIOPLL>,
> > >                                  <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
> > >                                  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> > >                         clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
> > >                         assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
> > >                                          <&scmi_clk IMX95_CLK_HSIOPLL>,
> > >                                          <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> > >                         assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
> > >                         assigned-clock-parents = <0>, <0>,
> > >                                                  <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
> > >                         power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> > >                         /* 0x30~0x37 stream id for pci0 */
> > >                         /*
> > >                          * iommu-map = <0x000 &apps_smmu 0x30 0x1>,
> > >                          * <0x100 &apps_smmu 0x31 0x1>;
> > >                          */
> > >                         status = "disabled";
> > >                 };
> > > 
> > > pcie1: pcie-ep@4c380000 {
> > >                         compatible = "fsl,imx95-pcie-ep";
> > >                         reg = <0 0x4c380000 0 0x20000>,
> > >                               <0 0x4c3e0000 0 0x1000>,
> > >                               <0 0x4c3a0000 0 0x1000>,
> > >                               <0 0x4c3c0000 0 0x10000>,
> > >                               <0 0x4c3f0000 0 0x10000>,
> > >                               <0xa 0 1 0>;
> > >                         reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
> > >                         interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
> > >                         interrupt-names = "dma";
> > >                         fsl,max-link-speed = <3>;
> > >                         clocks = <&scmi_clk IMX95_CLK_HSIO>,
> > >                                  <&scmi_clk IMX95_CLK_HSIOPLL>,
> > >                                  <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
> > >                                  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> > >                         clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
> > >                         assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
> > >                                          <&scmi_clk IMX95_CLK_HSIOPLL>,
> > >                                          <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> > >                         assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
> > >                         assigned-clock-parents = <0>, <0>,
> > >                                                  <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
> > >                         power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> > >                         status = "disabled";
> > >                 };
> > > 
> > > Frank Li (13):
> > >   PCI: imx6: Simplify clock handling by using clk_bulk*() function
> > >   PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV
> > >   PCI: imx6: Simplify reset handling by using by using
> > >     *_FLAG_HAS_*_RESET
> > >   PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask
> > >   PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
> > >   PCI: imx6: Simplify switch-case logic by involve init_phy callback
> > >   dt-bindings: imx6q-pcie: Clean up irrationality clocks check
> > >   dt-bindings: imx6q-pcie: Restruct reg and reg-name
> > >   PCI: imx6: Add iMX95 PCIe Root Complex support
> > >   PCI: imx6: Clean up get addr_space code
> > >   PCI: imx6: Add epc_features in imx6_pcie_drvdata
> > >   dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string
> > >   PCI: imx6: Add iMX95 Endpoint (EP) support
> > > 
> > > Richard Zhu (1):
> > >   dt-bindings: imx6q-pcie: Add imx95 pcie compatible string
> > > 
> > >  .../bindings/pci/fsl,imx6q-pcie-common.yaml   |  17 +-
> > >  .../bindings/pci/fsl,imx6q-pcie-ep.yaml       |  46 +-
> > >  .../bindings/pci/fsl,imx6q-pcie.yaml          |  49 +-
> > >  drivers/pci/controller/dwc/pci-imx6.c         | 634 ++++++++++--------
> > >  4 files changed, 436 insertions(+), 310 deletions(-)
> > > 
> > > -- 
> > > 2.34.1
> > > 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux