Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
---
arch/arm/boot/dts/microchip/sama7g5.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..15227a870d34 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -714,7 +714,7 @@ uart0: serial@200 {
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
clock-names = "usart";
dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
- <&dma1 AT91_XDMAC_DT_PERID(5)>;
+ <&dma1 AT91_XDMAC_DT_PERID(5)>;
dma-names = "tx", "rx";
atmel,use-dma-rx;
atmel,use-dma-tx;
@@ -740,7 +740,7 @@ i2c1: i2c@600 {
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
- <&dma0 AT91_XDMAC_DT_PERID(7)>;
+ <&dma0 AT91_XDMAC_DT_PERID(7)>;
dma-names = "tx", "rx";
status = "disabled";
};
@@ -763,7 +763,7 @@ uart3: serial@200 {
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
clock-names = "usart";
dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
- <&dma1 AT91_XDMAC_DT_PERID(11)>;
+ <&dma1 AT91_XDMAC_DT_PERID(11)>;
dma-names = "tx", "rx";
atmel,use-dma-rx;
atmel,use-dma-tx;
@@ -807,7 +807,7 @@ uart4: serial@200 {
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
clock-names = "usart";
dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
- <&dma1 AT91_XDMAC_DT_PERID(13)>;
+ <&dma1 AT91_XDMAC_DT_PERID(13)>;
dma-names = "tx", "rx";
atmel,use-dma-rx;
atmel,use-dma-tx;
@@ -833,7 +833,7 @@ uart7: serial@200 {
clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
clock-names = "usart";
dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
- <&dma1 AT91_XDMAC_DT_PERID(19)>;
+ <&dma1 AT91_XDMAC_DT_PERID(19)>;
dma-names = "tx", "rx";
atmel,use-dma-rx;
atmel,use-dma-tx;
@@ -928,7 +928,7 @@ i2c8: i2c@600 {
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
- <&dma0 AT91_XDMAC_DT_PERID(21)>;
+ <&dma0 AT91_XDMAC_DT_PERID(21)>;
dma-names = "tx", "rx";
status = "disabled";
};
@@ -952,7 +952,7 @@ i2c9: i2c@600 {
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
- <&dma0 AT91_XDMAC_DT_PERID(23)>;
+ <&dma0 AT91_XDMAC_DT_PERID(23)>;
dma-names = "tx", "rx";
status = "disabled";
};
@@ -977,7 +977,7 @@ spi11: spi@400 {
#size-cells = <0>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
- <&dma0 AT91_XDMAC_DT_PERID(27)>;
+ <&dma0 AT91_XDMAC_DT_PERID(27)>;
dma-names = "tx", "rx";
status = "disabled";
};
--
2.39.2
