On 2/17/2024 6:14 PM, Krzysztof Kozlowski wrote:
On 16/02/2024 16:21, Yang Xiwen via B4 Relay wrote:
From: Yang Xiwen <forbidden405@xxxxxxxxxxx>
Also rename to hisilicon,inno-usb2-phy.yaml and add this name to
compatible lists.
Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.
Will fix in next version
Signed-off-by: Yang Xiwen <forbidden405@xxxxxxxxxxx>
---
.../bindings/phy/hisilicon,inno-usb2-phy.yaml | 115 +++++++++++++++++++++
.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 71 -------------
2 files changed, 115 insertions(+), 71 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
new file mode 100644
index 000000000000..73256eee10f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,inno-usb2-phy.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,inno-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon HiSTB SoCs INNO USB2 PHY device
+
+maintainers:
+ - Yang Xiwen <forbidden405@xxxxxxxxxxx>
+
+properties:
+ compatible:
+ minItems: 1
No, why? Compatibles must be fixed/constrained.
+ items:
+ - enum:
+ - hisilicon,hi3798cv200-usb2-phy
+ - hisilicon,hi3798mv100-usb2-phy
This wasn't here before. Not explained in commit msg.
The commit 3940ffc65492 ("phy: hisilicon: Add inno-usb2-phy driver for
Hi3798MV100") does not have dt-binding change commit along with. Will
explain this in commit log.
+ - const: hisilicon,inno-usb2-phy
+
+ reg:
+ maxItems: 1
+ description: |
Do not need '|' unless you need to preserve formatting.
+ Should be the address space for PHY configuration register in peripheral
+ controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.
+ Or direct MMIO address space.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ clocks:
+ maxItems: 1
+ description: reference clock
+
+ resets:
+ maxItems: 1
+
+patternProperties:
+ 'phy@[0-9a-f]+':
+ type: object
+ additionalProperties: false
+ description: individual ports provided by INNO PHY
+
+ properties:
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+ resets:
+ maxItems: 1
+
+ required: [reg, '#phy-cells', resets]
One item per line. Look at other bindings or example-schema.
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/histb-clock.h>
+
+ peripheral-controller@8a20000 {
+ compatible = "hisilicon,hi3798cv200-perictrl", "syscon", "simple-mfd";
+ reg = <0x8a20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x8a20000 0x1000>;
Drop the node, not related to this binding. If this binding is supposed
to be part of other device in case of MFD devices or some tightly
coupled ones, then could be included in the example there.
For CV200, this binding is supposed to be always inside the perictrl
device. The PHY address space are accessed from a bus implemented by
perictrl.
+
+ usb2-phy@120 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
+ reg = <0x120 0x4>;
+ clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+ resets = <&crg 0xbc 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 8>;
+ };
+
+ phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ resets = <&crg 0xbc 9>;
+ };
+ };
+
+ usb2-phy@124 {
+ compatible = "hisilicon,hi3798cv200-usb2-phy";
You can keep only one example, because they are basically the same.
Will remove
Best regards,
Krzysztof
--
Regards,
Yang Xiwen
