Re: [PATCH 1/6] net: hisilicon: add support for hisi_femac core on Hi3798MV200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 16, 2024 at 09:41:29PM +0800, Yang Xiwen wrote:
> On 2/16/2024 9:23 PM, Andrew Lunn wrote:
> > > +	// Register the optional MDIO bus
> > > +	for_each_available_child_of_node(node, mdio_np) {
> > > +		if (of_node_name_prefix(mdio_np, "mdio")) {
> > > +			priv->mdio_pdev = of_platform_device_create(mdio_np, NULL, dev);
> > > +			of_node_put(mdio_np);
> > > +			if (!priv->mdio_pdev) {
> > > +				dev_err(dev, "failed to register MDIO bus device\n");
> > > +				goto out_free_netdev;
> > > +			}
> > > +			mdio_registered = true;
> > > +			break;
> > > +		}
> > > +	}
> > > +
> > > +	if (!mdio_registered)
> > > +		dev_warn(dev, "MDIO subnode notfound. This is usually a bug.\n");
> > I don't understand the architecture of this device yet...
> > 
> > It seems like you have an integrated PHY? In the example, you used a
> > phy-handle to bind the MAC to the PHY. So why is the MDIO bus
> > optional?
> Because the MAC can also support external PHY according to the datasheet.
> Maybe some other SoCs didn't implement this internal PHY and used an
> external PHY instead.
> > 
> > Do the MII signals from the MAC also go to SoC pins, so you could use
> > an external PHY? Is there a SERDES so you could connect to an SFP
> > cage?
> No. MII signals is not accessible outside of the SoC. The SoC only exports
> FEPHY pins (i.e. RXN(P) and TXN(P)).
> > 
> > Also, do the MDIO pins go to SoC pins? Can the MDIO bus master be used
> > to control external PHYs?
> It can, but not for Hi3798MV200. The datasheet said it can use both internal
> phy or external phy. But for Hi3798MV200, seems impossible.

So for the Hi3798MV200 this is not optional, the MDIO bus is
mandatory.

Also, it sounds like it exists in the silicon. So it is better to
always describe it in the .dtsi file.

And i took a quick look at mdio-hisi-femac.c. It has a probe function
which does:

        data->membase = devm_platform_ioremap_resource(pdev, 0);

meaning it expects to have its own address range. It is a device of
its own. That also explains the compatible. So please move the MDIO
bus to a node of its own, rather than embedding it within the MAC
node.

	Andrew




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux