Add exti1 as interrupt parent for the two pin controllers.
Add the additional required property st,syscfg.
Signed-off-by: Antonio Borneo <antonio.borneo@xxxxxxxxxxx>
---
arch/arm64/boot/dts/st/stm32mp251.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 4253f5bcd000..6d46450afd4d 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -254,6 +254,8 @@ pinctrl: pinctrl@44240000 {
#size-cells = <1>;
compatible = "st,stm32mp257-pinctrl";
ranges = <0 0x44240000 0xa0400>;
+ interrupt-parent = <&exti1>;
+ st,syscfg = <&exti1 0x60 0xff>;
pins-are-numbered;
gpioa: gpio@44240000 {
@@ -383,6 +385,8 @@ pinctrl_z: pinctrl@46200000 {
#size-cells = <1>;
compatible = "st,stm32mp257-z-pinctrl";
ranges = <0 0x46200000 0x400>;
+ interrupt-parent = <&exti1>;
+ st,syscfg = <&exti1 0x60 0xff>;
pins-are-numbered;
gpioz: gpio@46200000 {
--
2.34.1
