On 10-02-24, 14:45, Adam Ford wrote:
> From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
>
> This adds the driver for the Samsung HDMI PHY found on the
> i.MX8MP SoC. Based on downstream implementation from
> Sandor Yu <Sandor.yu@xxxxxxx>. According to the TRM, the PHY
> receives parallel data from the link and serializes it. It
> also sets the PLL clock needed for the TX serializer.
>
> Tested-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> (v2)
> Tested-by: Richard Leitner <richard.leitner@xxxxxxxxxxx> (v2)
> Co-developed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Tested-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> Tested-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> # Kontron BL
> Tested-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> ---
> V4:
> - I (Adam) added a comment in the code for clarifcation
> based on questions from Luca concerning a difference
> between the code and the ref manual.
> - Fixed the GENMASK on REG14
> - Expanded the commit message briefly describing
> a bit more of what this driver does.
> - Removed some unnecessary include files.
>
> v3:
> - use GENMASK/FIELD_PREP
> - lowercase hex values
> - correct coding style
> v2:
> - use DEFINE_RUNTIME_DEV_PM_OPS
> ---
> drivers/phy/freescale/Kconfig | 6 +
> drivers/phy/freescale/Makefile | 1 +
> drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 721 +++++++++++++++++++
> 3 files changed, 728 insertions(+)
> create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
>
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index 853958fb2c06..5c2b73042dfc 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
> Enable this to add support for the PCIE PHY as found on
> i.MX8M family of SOCs.
>
> +config PHY_FSL_SAMSUNG_HDMI_PHY
> + tristate "Samsung HDMI PHY support"
> + depends on OF && HAS_IOMEM
> + help
> + Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
> +
> endif
>
> config PHY_FSL_LYNX_28G
> diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
> index cedb328bc4d2..c4386bfdb853 100644
> --- a/drivers/phy/freescale/Makefile
> +++ b/drivers/phy/freescale/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) += phy-fsl-imx8qm-lvds-phy.o
> obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
> obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
> obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
> +obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
> diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> new file mode 100644
> index 000000000000..91cf8e4668b2
> --- /dev/null
> +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> @@ -0,0 +1,721 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 NXP
> + * Copyright 2022 Pengutronix, Lucas Stach <kernel@xxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
Do you need both of these headers?
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
same here
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#define PHY_REG_00 0x00
> +#define PHY_REG_01 0x04
> +#define PHY_REG_02 0x08
> +#define PHY_REG_08 0x20
> +#define PHY_REG_09 0x24
> +#define PHY_REG_10 0x28
> +#define PHY_REG_11 0x2c
> +
> +#define PHY_REG_12 0x30
> +#define REG12_CK_DIV_MASK GENMASK(5, 4)
> +
> +#define PHY_REG_13 0x34
> +#define REG13_TG_CODE_LOW_MASK GENMASK(7, 0)
> +
> +#define PHY_REG_14 0x38
> +#define REG14_TOL_MASK GENMASK(7, 4)
> +#define REG14_RP_CODE_MASK GENMASK(3, 1)
> +#define REG14_TG_CODE_HIGH_MASK GENMASK(0, 0)
> +
> +#define PHY_REG_15 0x3c
> +#define PHY_REG_16 0x40
> +#define PHY_REG_17 0x44
> +#define PHY_REG_18 0x48
> +#define PHY_REG_19 0x4c
> +#define PHY_REG_20 0x50
> +
> +#define PHY_REG_21 0x54
> +#define REG21_SEL_TX_CK_INV BIT(7)
> +#define REG21_PMS_S_MASK GENMASK(3, 0)
> +
> +#define PHY_REG_22 0x58
> +#define PHY_REG_23 0x5c
> +#define PHY_REG_24 0x60
> +#define PHY_REG_25 0x64
> +#define PHY_REG_26 0x68
> +#define PHY_REG_27 0x6c
> +#define PHY_REG_28 0x70
> +#define PHY_REG_29 0x74
> +#define PHY_REG_30 0x78
> +#define PHY_REG_31 0x7c
> +#define PHY_REG_32 0x80
> +
> +/*
> + * REG33 does not match the ref manual. According to Sandor Yu from NXP,
> + * "There is a doc issue on the i.MX8MP latest RM"
> + * REG33 is being used per guidance from Sandor
> + */
> +
> +#define PHY_REG_33 0x84
> +#define REG33_MODE_SET_DONE BIT(7)
> +#define REG33_FIX_DA BIT(1)
> +
> +#define PHY_REG_34 0x88
> +#define REG34_PHY_READY BIT(7)
> +#define REG34_PLL_LOCK BIT(6)
> +#define REG34_PHY_CLK_READY BIT(5)
> +
> +#define PHY_REG_35 0x8c
> +#define PHY_REG_36 0x90
> +#define PHY_REG_37 0x94
> +#define PHY_REG_38 0x98
> +#define PHY_REG_39 0x9c
> +#define PHY_REG_40 0xa0
> +#define PHY_REG_41 0xa4
> +#define PHY_REG_42 0xa8
> +#define PHY_REG_43 0xac
> +#define PHY_REG_44 0xb0
> +#define PHY_REG_45 0xb4
> +#define PHY_REG_46 0xb8
> +#define PHY_REG_47 0xbc
> +
> +#define PHY_PLL_DIV_REGS_NUM 6
> +
> +struct phy_config {
> + u32 pixclk;
> + u8 pll_div_regs[PHY_PLL_DIV_REGS_NUM];
> +};
> +
> +const struct phy_config phy_pll_cfg[] = {
> + {
> + .pixclk = 22250000,
> + .pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 23750000,
> + .pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
> + }, {
> + .pixclk = 24000000,
> + .pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 24024000,
> + .pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
> + }, {
> + .pixclk = 25175000,
> + .pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
> + }, {
> + .pixclk = 25200000,
> + .pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 26750000,
> + .pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 27000000,
> + .pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 27027000,
> + .pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 29500000,
> + .pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 30750000,
> + .pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 30888000,
> + .pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
> + }, {
> + .pixclk = 33750000,
> + .pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 35000000,
> + .pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 36000000,
> + .pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 36036000,
> + .pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 40000000,
> + .pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 43200000,
> + .pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 43243200,
> + .pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 44500000,
> + .pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
> + }, {
> + .pixclk = 47000000,
> + .pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
> + }, {
> + .pixclk = 47500000,
> + .pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
> + }, {
> + .pixclk = 50349650,
> + .pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
> + }, {
> + .pixclk = 50400000,
> + .pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 53250000,
> + .pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 53500000,
> + .pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 54000000,
> + .pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 54054000,
> + .pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 59000000,
> + .pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 59340659,
> + .pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
> + }, {
> + .pixclk = 59400000,
> + .pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 61500000,
> + .pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 63500000,
> + .pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 67500000,
> + .pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
> + }, {
> + .pixclk = 70000000,
> + .pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 72000000,
> + .pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 72072000,
> + .pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 74176000,
> + .pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
> + }, {
> + .pixclk = 74250000,
> + .pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
> + }, {
> + .pixclk = 78500000,
> + .pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 80000000,
> + .pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 82000000,
> + .pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 82500000,
> + .pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
> + }, {
> + .pixclk = 89000000,
> + .pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
> + }, {
> + .pixclk = 90000000,
> + .pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 94000000,
> + .pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
> + }, {
> + .pixclk = 95000000,
> + .pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
> + }, {
> + .pixclk = 98901099,
> + .pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
> + }, {
> + .pixclk = 99000000,
> + .pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
> + }, {
> + .pixclk = 100699300,
> + .pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
> + }, {
> + .pixclk = 100800000,
> + .pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 102500000,
> + .pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
> + }, {
> + .pixclk = 104750000,
> + .pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
> + }, {
> + .pixclk = 106500000,
> + .pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 107000000,
> + .pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 108000000,
> + .pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 108108000,
> + .pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 118000000,
> + .pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 118800000,
> + .pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 123000000,
> + .pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 127000000,
> + .pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 135000000,
> + .pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 135580000,
> + .pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
> + }, {
> + .pixclk = 137520000,
> + .pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
> + }, {
> + .pixclk = 138750000,
> + .pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
> + }, {
> + .pixclk = 140000000,
> + .pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
> + }, {
> + .pixclk = 144000000,
> + .pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 148352000,
> + .pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
> + }, {
> + .pixclk = 148500000,
> + .pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
> + }, {
> + .pixclk = 154000000,
> + .pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
> + }, {
> + .pixclk = 157000000,
> + .pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
> + }, {
> + .pixclk = 160000000,
> + .pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
> + }, {
> + .pixclk = 162000000,
> + .pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
> + }, {
> + .pixclk = 164000000,
> + .pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
> + }, {
> + .pixclk = 165000000,
> + .pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
> + }, {
> + .pixclk = 180000000,
> + .pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 185625000,
> + .pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
> + }, {
> + .pixclk = 188000000,
> + .pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
> + }, {
> + .pixclk = 198000000,
> + .pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
> + }, {
> + .pixclk = 205000000,
> + .pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
> + }, {
> + .pixclk = 209500000,
> + .pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
> + }, {
> + .pixclk = 213000000,
> + .pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 216000000,
> + .pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 216216000,
> + .pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 237600000,
> + .pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 254000000,
> + .pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 277500000,
> + .pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
> + }, {
> + .pixclk = 288000000,
> + .pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 297000000,
> + .pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
> + },
> +};
> +
> +struct reg_settings {
> + u8 reg;
> + u8 val;
> +};
> +
> +const struct reg_settings common_phy_cfg[] = {
> + { PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
> + { PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
> + { PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
> + /* REG12 pixclk specific */
> + /* REG13 pixclk specific */
> + /* REG14 pixclk specific */
> + { PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
> + { PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
> + { PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
> + /* REG21 pixclk specific */
> + { PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
> + { PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
> + { PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
> + { PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
> + { PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
> + { PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
> + { PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
> + { PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
> + { PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
> + { PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
> + { PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
> + { PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
> + { PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
> +};
> +
> +struct fsl_samsung_hdmi_phy {
> + struct device *dev;
> + void __iomem *regs;
> + struct clk *apbclk;
> + struct clk *refclk;
> +
> + /* clk provider */
> + struct clk_hw hw;
> + const struct phy_config *cur_cfg;
> +};
> +
> +static inline struct fsl_samsung_hdmi_phy *
> +to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
> +{
> + return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config *cfg)
> +{
> + u8 div;
this would lead to static checkers complaining that div can be used
uninitialized, there is no default in the switch below to handle that, so
better to initialize this to 0 here
> +
> + switch (cfg->pixclk) {
> + case 22250000 ... 33750000:
> + div = 0xf;
> + break;
> + case 35000000 ... 40000000:
> + div = 0xb;
> + break;
> + case 43200000 ... 47500000:
> + div = 0x9;
> + break;
> + case 50349650 ... 63500000:
> + div = 0x7;
> + break;
> + case 67500000 ... 90000000:
> + div = 0x5;
> + break;
> + case 94000000 ... 148500000:
> + div = 0x3;
> + break;
> + case 154000000 ... 297000000:
> + div = 0x1;
> + break;
> + }
> +
> + writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
> + phy->regs + PHY_REG_21);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config *cfg)
> +{
> + u32 pclk = cfg->pixclk;
> + u32 fld_tg_code;
> + u32 pclk_khz;
> + u8 div;
this might suffer from same issue
> +
> + switch (cfg->pixclk) {
> + case 22250000 ... 47500000:
> + div = 1;
> + break;
> + case 50349650 ... 99000000:
> + div = 2;
> + break;
> + case 100699300 ... 198000000:
> + div = 4;
> + break;
> + case 205000000 ... 297000000:
> + div = 8;
> + break;
> + }
> +
> + writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG_12);
> +
> + /*
> + * Calculation for the frequency lock detector target code (fld_tg_code)
> + * is based on reference manual register description of PHY_REG13
> + * (13.10.3.1.14.2):
> + * 1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
> + * 2nd) Increase resolution to avoid rounding issues
> + * 3th) Do the div (256 / Freq. of int_pllclk) * 24
> + * 4th) Reduce the resolution and always round up since the NXP
> + * settings rounding up always too. TODO: Check if that is
> + * correct.
> + */
> + pclk /= div;
> + pclk_khz = pclk / 1000;
> + fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
> + fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
> +
> + /* FLD_TOL and FLD_RP_CODE taken from downstream driver */
> + writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
> + phy->regs + PHY_REG_13);
> + writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
> + FIELD_PREP(REG14_RP_CODE_MASK, 2) |
> + FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
> + phy->regs + PHY_REG_14);
> +}
> +
> +static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config *cfg)
> +{
> + int i, ret;
> + u8 val;
> +
> + /* HDMI PHY init */
> + writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
> +
> + /* common PHY registers */
> + for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
> + writeb(common_phy_cfg[i].val, phy->regs + common_phy_cfg[i].reg);
> +
> + /* set individual PLL registers PHY_REG2 ... PHY_REG7 */
> + for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
> + writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i * 4);
> +
> + fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
> + fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
> +
> + writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
> +
> + ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
> + val & REG34_PLL_LOCK, 50, 20000);
> + if (ret)
> + dev_err(phy->dev, "PLL failed to lock\n");
> +
> + return ret;
> +}
> +
> +static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +
> + if (!phy->cur_cfg)
> + return 74250000;
> +
> + return phy->cur_cfg->pixclk;
> +}
> +
> +static long phy_clk_round_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long *parent_rate)
> +{
> + int i;
> +
> + for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> + if (phy_pll_cfg[i].pixclk <= rate)
> + return phy_pll_cfg[i].pixclk;
> +
> + return -EINVAL;
> +}
> +
> +static int phy_clk_set_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long parent_rate)
> +{
> + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> + int i;
> +
> + for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> + if (phy_pll_cfg[i].pixclk <= rate)
> + break;
> +
> + if (i < 0)
> + return -EINVAL;
> +
> + phy->cur_cfg = &phy_pll_cfg[i];
> +
> + return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +}
> +
> +static const struct clk_ops phy_clk_ops = {
> + .recalc_rate = phy_clk_recalc_rate,
> + .round_rate = phy_clk_round_rate,
> + .set_rate = phy_clk_set_rate,
> +};
> +
> +static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
> +{
> + struct device *dev = phy->dev;
> + struct device_node *np = dev->of_node;
> + struct clk_init_data init;
> + const char *parent_name;
> + struct clk *phyclk;
> + int ret;
> +
> + parent_name = __clk_get_name(phy->refclk);
> +
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + init.flags = 0;
> + init.name = "hdmi_pclk";
> + init.ops = &phy_clk_ops;
> +
> + phy->hw.init = &init;
> +
> + phyclk = devm_clk_register(dev, &phy->hw);
> + if (IS_ERR(phyclk))
> + return dev_err_probe(dev, PTR_ERR(phyclk),
> + "failed to register clock\n");
> +
> + ret = of_clk_add_provider(np, of_clk_src_simple_get, phyclk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to register clock provider\n");
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
> +{
> + struct fsl_samsung_hdmi_phy *phy;
> + int ret;
> +
> + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, phy);
> + phy->dev = &pdev->dev;
> +
> + phy->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(phy->regs))
> + return PTR_ERR(phy->regs);
> +
> + phy->apbclk = devm_clk_get(phy->dev, "apb");
> + if (IS_ERR(phy->apbclk))
> + return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
> + "failed to get apb clk\n");
> +
> + phy->refclk = devm_clk_get(phy->dev, "ref");
> + if (IS_ERR(phy->refclk))
> + return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
> + "failed to get ref clk\n");
> +
> + ret = clk_prepare_enable(phy->apbclk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable apbclk\n");
> + return ret;
> + }
> +
> + pm_runtime_get_noresume(phy->dev);
> + pm_runtime_set_active(phy->dev);
> + pm_runtime_enable(phy->dev);
> +
> + ret = phy_clk_register(phy);
> + if (ret) {
> + dev_err(&pdev->dev, "register clk failed\n");
> + goto register_clk_failed;
> + }
> +
> + pm_runtime_put(phy->dev);
> +
> + return 0;
> +
> +register_clk_failed:
> + clk_disable_unprepare(phy->apbclk);
> +
> + return ret;
> +}
> +
> +static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
> +{
> + of_clk_del_provider(pdev->dev.of_node);
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_suspend(struct device *dev)
annotate these with __maybe_unused please, when PM is disabled we get
warning about unused symbols
> +{
> + struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(phy->apbclk);
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_resume(struct device *dev)
> +{
> + struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + ret = clk_prepare_enable(phy->apbclk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable apbclk\n");
> + return ret;
> + }
> +
> + if (phy->cur_cfg)
> + ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +
> + return ret;
> +
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
> + fsl_samsung_hdmi_phy_suspend,
> + fsl_samsung_hdmi_phy_resume, NULL);
> +
> +static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
> + {
> + .compatible = "fsl,imx8mp-hdmi-phy",
> + }, {
> + /* sentinel */
> + }
> +};
> +MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
> +
> +static struct platform_driver fsl_samsung_hdmi_phy_driver = {
> + .probe = fsl_samsung_hdmi_phy_probe,
> + .remove = fsl_samsung_hdmi_phy_remove,
> + .driver = {
> + .name = "fsl-samsung-hdmi-phy",
> + .of_match_table = fsl_samsung_hdmi_phy_of_match,
> + .pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
> + },
> +};
> +module_platform_driver(fsl_samsung_hdmi_phy_driver);
> +
> +MODULE_AUTHOR("Sandor Yu <Sandor.yu@xxxxxxx>");
> +MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.43.0
--
~Vinod
