From: Yang Xiwen <forbidden405@xxxxxxxxxxx> The user documented(Hi3516) is not found in current kernel anymore. Remove this binding entirely due to recent driver changes. Signed-off-by: Yang Xiwen <forbidden405@xxxxxxxxxxx> --- .../devicetree/bindings/net/hisilicon-femac.txt | 41 ---------------------- 1 file changed, 41 deletions(-) diff --git a/Documentation/devicetree/bindings/net/hisilicon-femac.txt b/Documentation/devicetree/bindings/net/hisilicon-femac.txt deleted file mode 100644 index 5f96976f3cea..000000000000 --- a/Documentation/devicetree/bindings/net/hisilicon-femac.txt +++ /dev/null @@ -1,41 +0,0 @@ -Hisilicon Fast Ethernet MAC controller - -Required properties: -- compatible: should contain one of the following version strings: - * "hisilicon,hisi-femac-v1" - * "hisilicon,hisi-femac-v2" - and the soc string "hisilicon,hi3516cv300-femac". -- reg: specifies base physical address(s) and size of the device registers. - The first region is the MAC core register base and size. - The second region is the global MAC control register. -- interrupts: should contain the MAC interrupt. -- clocks: A phandle to the MAC main clock. -- resets: should contain the phandle to the MAC reset signal(required) and - the PHY reset signal(optional). -- reset-names: should contain the reset signal name "mac"(required) - and "phy"(optional). -- phy-mode: see ethernet.txt [1]. -- phy-handle: see ethernet.txt [1]. -- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given. - The 1st cell is reset pre-delay in micro seconds. - The 2nd cell is reset pulse in micro seconds. - The 3rd cell is reset post-delay in micro seconds. - -The MAC address will be determined using the optional properties -defined in ethernet.txt[1]. - -[1] Documentation/devicetree/bindings/net/ethernet.txt - -Example: - hisi_femac: ethernet@10090000 { - compatible = "hisilicon,hi3516cv300-femac","hisilicon,hisi-femac-v2"; - reg = <0x10090000 0x1000>,<0x10091300 0x200>; - interrupts = <12>; - clocks = <&crg HI3518EV200_ETH_CLK>; - resets = <&crg 0xec 0>,<&crg 0xec 3>; - reset-names = "mac","phy"; - mac-address = [00 00 00 00 00 00]; - phy-mode = "mii"; - phy-handle = <&phy0>; - hisilicon,phy-reset-delays-us = <10000 20000 20000>; - }; -- 2.43.0