Create a regmap for accessing the master registers over OPB to use the new common master initialization and link enable procedures. Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx> --- drivers/fsi/fsi-master-aspeed.c | 146 ++++++++------------------------ 1 file changed, 37 insertions(+), 109 deletions(-) diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c index d6e923b8f501..2258980e4c47 100644 --- a/drivers/fsi/fsi-master-aspeed.c +++ b/drivers/fsi/fsi-master-aspeed.c @@ -90,14 +90,6 @@ static const u32 fsi_base = 0xa0000000; #define CREATE_TRACE_POINTS #include <trace/events/fsi_master_aspeed.h> -#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */ - -/* Run the bus at maximum speed by default */ -#define FSI_DIVISOR_DEFAULT 1 -#define FSI_DIVISOR_CABLED 2 -static u16 aspeed_fsi_divisor = FSI_DIVISOR_DEFAULT; -module_param_named(bus_div,aspeed_fsi_divisor, ushort, 0); - #define OPB_POLL_TIMEOUT 500 static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr, @@ -328,35 +320,6 @@ static int aspeed_master_write(struct fsi_master *master, int link, return ret; } -static int aspeed_master_link_enable(struct fsi_master *master, int link, - bool enable) -{ - struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master); - int idx, bit, ret; - __be32 reg; - - idx = link / 32; - bit = link % 32; - - reg = cpu_to_be32(0x80000000 >> bit); - - mutex_lock(&aspeed->lock); - - if (!enable) { - ret = opb_writel(aspeed, ctrl_base + FSI_MCENP0 + (4 * idx), reg); - goto done; - } - - ret = opb_writel(aspeed, ctrl_base + FSI_MSENP0 + (4 * idx), reg); - if (ret) - goto done; - - mdelay(FSI_LINK_ENABLE_SETUP_TIME); -done: - mutex_unlock(&aspeed->lock); - return ret; -} - static int aspeed_master_term(struct fsi_master *master, int link, uint8_t id) { uint32_t addr; @@ -384,72 +347,33 @@ static void aspeed_master_release(struct device *dev) struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(to_fsi_master(dev)); + regmap_exit(aspeed->master.map); kfree(aspeed); } -/* mmode encoders */ -static inline u32 fsi_mmode_crs0(u32 x) +static int regmap_aspeed_opb_read(void *context, unsigned int reg, unsigned int *val) { - return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT; -} + __be32 v; + int ret; -static inline u32 fsi_mmode_crs1(u32 x) -{ - return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT; + ret = opb_readl(context, ctrl_base + reg, &v); + if (ret) + return ret; + + *val = be32_to_cpu(v); + return 0; } -static int aspeed_master_init(struct fsi_master_aspeed *aspeed) +static int regmap_aspeed_opb_write(void *context, unsigned int reg, unsigned int val) { - __be32 reg; - - reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK - | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE); - opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg); - - /* Initialize the MFSI (hub master) engine */ - reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK - | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE); - opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg); - - reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM); - opb_writel(aspeed, ctrl_base + FSI_MECTRL, reg); - - reg = cpu_to_be32(FSI_MMODE_ECRC | FSI_MMODE_EPC | FSI_MMODE_RELA - | fsi_mmode_crs0(aspeed_fsi_divisor) - | fsi_mmode_crs1(aspeed_fsi_divisor) - | FSI_MMODE_P8_TO_LSB); - dev_info(aspeed->dev, "mmode set to %08x (divisor %d)\n", - be32_to_cpu(reg), aspeed_fsi_divisor); - opb_writel(aspeed, ctrl_base + FSI_MMODE, reg); - - reg = cpu_to_be32(0xffff0000); - opb_writel(aspeed, ctrl_base + FSI_MDLYR, reg); - - reg = cpu_to_be32(~0); - opb_writel(aspeed, ctrl_base + FSI_MSENP0, reg); - - /* Leave enabled long enough for master logic to set up */ - mdelay(FSI_LINK_ENABLE_SETUP_TIME); - - opb_writel(aspeed, ctrl_base + FSI_MCENP0, reg); - - opb_readl(aspeed, ctrl_base + FSI_MAEB, NULL); - - reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK); - opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg); - - opb_readl(aspeed, ctrl_base + FSI_MLEVP0, NULL); - - /* Reset the master bridge */ - reg = cpu_to_be32(FSI_MRESB_RST_GEN); - opb_writel(aspeed, ctrl_base + FSI_MRESB0, reg); - - reg = cpu_to_be32(FSI_MRESB_RST_ERR); - opb_writel(aspeed, ctrl_base + FSI_MRESB0, reg); - - return 0; + return opb_writel(context, ctrl_base + reg, cpu_to_be32(val)); } +static const struct regmap_bus regmap_aspeed_opb = { + .reg_write = regmap_aspeed_opb_write, + .reg_read = regmap_aspeed_opb_read, +}; + static ssize_t cfam_reset_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -521,14 +445,6 @@ static int tacoma_cabled_fsi_fixup(struct device *dev) /* If the routing GPIO is high we should set the mux to low. */ if (gpio) { - /* - * Cable signal integrity means we should run the bus - * slightly slower. Do not override if a kernel param - * has already overridden. - */ - if (aspeed_fsi_divisor == FSI_DIVISOR_DEFAULT) - aspeed_fsi_divisor = FSI_DIVISOR_CABLED; - gpiod_direction_output(mux_gpio, 0); dev_info(dev, "FSI configured for external cable\n"); } else { @@ -544,9 +460,10 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev) { const struct fsi_master_aspeed_data *md = of_device_get_match_data(&pdev->dev); u32 opb_retry_counter = md ? md->opb_retry_counter : OPB_RETRY_COUNTER_AST2600; + struct regmap_config aspeed_master_regmap_config; struct fsi_master_aspeed *aspeed; - int rc, links, reg; - __be32 raw; + unsigned int reg; + int rc, links; rc = tacoma_cabled_fsi_fixup(&pdev->dev); if (rc) { @@ -606,13 +523,20 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev) */ writel(0x1, aspeed->base + OPB0_SELECT); - rc = opb_readl(aspeed, ctrl_base + FSI_MVER, &raw); + fsi_master_regmap_config(&aspeed_master_regmap_config); + aspeed->master.map = regmap_init(&pdev->dev, ®map_aspeed_opb, aspeed, + &aspeed_master_regmap_config); + if (IS_ERR(aspeed->master.map)) { + rc = PTR_ERR(aspeed->master.map); + goto err_release; + } + + rc = regmap_read(aspeed->master.map, FSI_MVER, ®); if (rc) { dev_err(&pdev->dev, "failed to read hub version\n"); - goto err_release; + goto err_regmap; } - reg = be32_to_cpu(raw); links = (reg >> 8) & 0xff; dev_info(&pdev->dev, "hub version %08x (%d links)\n", reg, links); @@ -621,20 +545,22 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev) aspeed->master.dev.of_node = of_node_get(dev_of_node(&pdev->dev)); aspeed->master.n_links = links; + aspeed->master.flags = FSI_MASTER_FLAG_RELA; aspeed->master.read = aspeed_master_read; aspeed->master.write = aspeed_master_write; aspeed->master.send_break = aspeed_master_break; aspeed->master.term = aspeed_master_term; - aspeed->master.link_enable = aspeed_master_link_enable; dev_set_drvdata(&pdev->dev, aspeed); mutex_init(&aspeed->lock); - aspeed_master_init(aspeed); + rc = fsi_master_init(&aspeed->master, clk_get_rate(aspeed->clk)); + if (rc) + goto err_regmap; rc = fsi_master_register(&aspeed->master); if (rc) - goto err_release; + goto err_regmap; /* At this point, fsi_master_register performs the device_initialize(), * and holds the sole reference on master.dev. This means the device @@ -646,6 +572,8 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev) get_device(&aspeed->master.dev); return 0; +err_regmap: + regmap_exit(aspeed->master.map); err_release: clk_disable_unprepare(aspeed->clk); err_free_aspeed: -- 2.39.3