Change offset in mux-reg-masks property for hbmc_mux node since reg-mux property is used in compatible. While here, update the reg region to include 4 bytes as this is a 32bit register. Fixes: 2765149273f4 ("mux: mmio: use reg property when parent device is not a syscon") Suggested-by: Peter Rosin <peda@xxxxxxxxxx> Signed-off-by: Andrew Davis <afd@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 40caa86e600fe..4618b697fbc47 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -353,9 +353,9 @@ fss: bus@47000000 { hbmc_mux: mux-controller@47000004 { compatible = "reg-mux"; - reg = <0x00 0x47000004 0x00 0x2>; + reg = <0x00 0x47000004 0x00 0x4>; #mux-control-cells = <1>; - mux-reg-masks = <0x4 0x2>; /* HBMC select */ + mux-reg-masks = <0x0 0x2>; /* HBMC select */ }; hbmc: hyperbus@47034000 { -- 2.39.2