On Wed, Jan 28, 2015 at 05:13:35PM +0000, Srinivas Kandagatla wrote:
> There are various issues with the examples in this documentation, some
> of the DT labels are invalid and one of the macro THERMAL_NO_LIMITS
> referenced is not available as well.
>
> This patch attempts to fix such errors in the documentation.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> Changes Since v1:
> - Fixed few more typo's as suggested by Eduardo Valentin
Looks like there are still occurencies of adc-dummy after your patch.
But I am amending myself, no need to resend.
>
> .../devicetree/bindings/thermal/thermal.txt | 66 +++++++++++-----------
> 1 file changed, 33 insertions(+), 33 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
> index f5db6b7..91c77da 100644
> --- a/Documentation/devicetree/bindings/thermal/thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/thermal.txt
> @@ -251,24 +251,24 @@ ocp {
> };
>
> thermal-zones {
> - cpu-thermal: cpu-thermal {
> + cpu_thermal: cpu-thermal {
> polling-delay-passive = <250>; /* milliseconds */
> polling-delay = <1000>; /* milliseconds */
>
> thermal-sensors = <&bandgap0>;
>
> trips {
> - cpu-alert0: cpu-alert {
> + cpu_alert0: cpu-alert0 {
> temperature = <90000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "active";
> };
> - cpu-alert1: cpu-alert {
> + cpu_alert1: cpu-alert1 {
> temperature = <100000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "passive";
> };
> - cpu-crit: cpu-crit {
> + cpu_crit: cpu-crit {
> temperature = <125000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "critical";
> @@ -277,17 +277,17 @@ thermal-zones {
>
> cooling-maps {
> map0 {
> - trip = <&cpu-alert0>;
> - cooling-device = <&fan0 THERMAL_NO_LIMITS 4>;
> + trip = <&cpu_alert0>;
> + cooling-device = <&fan0 THERMAL_NO_LIMIT 4>;
> };
> map1 {
> - trip = <&cpu-alert1>;
> - cooling-device = <&fan0 5 THERMAL_NO_LIMITS>;
> + trip = <&cpu_alert1>;
> + cooling-device = <&fan0 5 THERMAL_NO_LIMIT>;
> };
> map2 {
> - trip = <&cpu-alert1>;
> + trip = <&cpu_alert1>;
> cooling-device =
> - <&cpu0 THERMAL_NO_LIMITS THERMAL_NO_LIMITS>;
> + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
> };
> @@ -298,13 +298,13 @@ used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
> device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten
> different cooling states 0-9. It is used to remove the heat out of
> the thermal zone 'cpu-thermal' using its cooling states
> -from its minimum to 4, when it reaches trip point 'cpu-alert0'
> +from its minimum to 4, when it reaches trip point 'cpu_alert0'
> at 90C, as an example of active cooling. The same cooling device is used at
> -'cpu-alert1', but from 5 to its maximum state. The cpu@0 device is also
> +'cpu_alert1', but from 5 to its maximum state. The cpu@0 device is also
> linked to the same thermal zone, 'cpu-thermal', as a passive cooling device,
> -using all its cooling states at trip point 'cpu-alert1',
> +using all its cooling states at trip point 'cpu_alert1',
> which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the
> -temperature of 125C, represented by the trip point 'cpu-crit', the silicon
> +temperature of 125C, represented by the trip point 'cpu_crit', the silicon
> is not reliable anymore.
>
> (b) - IC with several internal sensors
> @@ -329,7 +329,7 @@ ocp {
> };
>
> thermal-zones {
> - cpu-thermal: cpu-thermal {
> + cpu_thermal: cpu-thermal {
> polling-delay-passive = <250>; /* milliseconds */
> polling-delay = <1000>; /* milliseconds */
>
> @@ -338,12 +338,12 @@ thermal-zones {
>
> trips {
> /* each zone within the SoC may have its own trips */
> - cpu-alert: cpu-alert {
> + cpu_alert: cpu-alert {
> temperature = <100000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "passive";
> };
> - cpu-crit: cpu-crit {
> + cpu_crit: cpu-crit {
> temperature = <125000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "critical";
> @@ -356,7 +356,7 @@ thermal-zones {
> };
> };
>
> - gpu-thermal: gpu-thermal {
> + gpu_thermal: gpu-thermal {
> polling-delay-passive = <120>; /* milliseconds */
> polling-delay = <1000>; /* milliseconds */
>
> @@ -365,12 +365,12 @@ thermal-zones {
>
> trips {
> /* each zone within the SoC may have its own trips */
> - gpu-alert: gpu-alert {
> + gpu_alert: gpu-alert {
> temperature = <90000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "passive";
> };
> - gpu-crit: gpu-crit {
> + gpu_crit: gpu-crit {
> temperature = <105000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "critical";
> @@ -383,7 +383,7 @@ thermal-zones {
> };
> };
>
> - dsp-thermal: dsp-thermal {
> + dsp_thermal: dsp-thermal {
> polling-delay-passive = <50>; /* milliseconds */
> polling-delay = <1000>; /* milliseconds */
>
> @@ -392,12 +392,12 @@ thermal-zones {
>
> trips {
> /* each zone within the SoC may have its own trips */
> - dsp-alert: gpu-alert {
> + dsp_alert: dsp-alert {
> temperature = <90000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "passive";
> };
> - dsp-crit: gpu-crit {
> + dsp_crit: gpu-crit {
> temperature = <135000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "critical";
> @@ -457,7 +457,7 @@ ocp {
> };
>
> thermal-zones {
> - cpu-thermal: cpu-thermal {
> + cpu_thermal: cpu-thermal {
> polling-delay-passive = <250>; /* milliseconds */
> polling-delay = <1000>; /* milliseconds */
>
> @@ -508,7 +508,7 @@ with many sensors and many cooling devices.
> /*
> * An IC with several temperature sensor.
> */
> - adc-dummy: sensor@0x50 {
> + adc_dummy: sensor@0x50 {
> ...
> #thermal-sensor-cells = <1>; /* sensor internal ID */
> };
> @@ -531,7 +531,7 @@ thermal-zones {
> };
> };
>
> - board-thermal: board-thermal {
> + board_thermal: board-thermal {
> polling-delay-passive = <1000>; /* milliseconds */
> polling-delay = <2500>; /* milliseconds */
>
> @@ -548,22 +548,22 @@ thermal-zones {
>
> trips {
> /* Trips are based on resulting linear equation */
> - cpu-trip: cpu-trip {
> + cpu_trip: cpu-trip {
> temperature = <60000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "passive";
> };
> - gpu-trip: gpu-trip {
> + gpu_trip: gpu-trip {
> temperature = <55000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "passive";
> }
> - lcd-trip: lcp-trip {
> + lcd_trip: lcp-trip {
> temperature = <53000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "passive";
> };
> - crit-trip: crit-trip {
> + crit_trip: crit-trip {
> temperature = <68000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "critical";
> @@ -572,17 +572,17 @@ thermal-zones {
>
> cooling-maps {
> map0 {
> - trip = <&cpu-trip>;
> + trip = <&cpu_trip>;
> cooling-device = <&cpu0 0 2>;
> contribution = <55>;
> };
> map1 {
> - trip = <&gpu-trip>;
> + trip = <&gpu_trip>;
> cooling-device = <&gpu0 0 2>;
> contribution = <20>;
> };
> map2 {
> - trip = <&lcd-trip>;
> + trip = <&lcd_trip>;
> cooling-device = <&lcd0 5 10>;
> contribution = <15>;
> };
> --
> 1.9.1
>
Attachment:
signature.asc
Description: Digital signature
