On Wed, 14 Feb 2024 21:29:30 +0100
Jernej Škrabec <jernej.skrabec@xxxxxxxxx> wrote:
Hi Jernej,
thanks for having a look and the tags on the other patches!
> Dne petek, 09. februar 2024 ob 15:42:15 CET je Andre Przywara napisal(a):
> > The Allwinner H616 SoC contains a mysterious bit at register offset 0x0
> > in the SRAM control block. If bit 16 is set (the reset value), the
> > temperature readings of the THS are way off, leading to reports about
> > 200C, at normal ambient temperatures. Clearing this bits brings the
> > reported values down to reasonable ranges.
> > The BSP code clears this bit in firmware (U-Boot), and has an explicit
> > comment about this, but offers no real explanation.
> >
> > Since we should not rely on firmware settings, allow other code (the THS
> > driver) to access this register, by exporting it through the already
> > existing regmap. This mimics what we already do for the LDO control and
> > the EMAC register.
>
> Are you sure that this bit doesn't control actual SRAM region?
Pretty much so, yes: I did some experiments from U-Boot:
I filled SRAM C with some pattern, then read this back. Then flipped bit
16, read again: same result. Then wrote something again and read it
back: no change. In fact no bits at 0x3000000 had any effect on SRAM
accessibility, only clearing bit 24 in 0x3000004 made the whole SRAM C
(0x28000-0x47fff) go read-as-zero/write-ignore, from the CPU side.
I then triggered the THS device, to do temperature readings, but
this didn't change a single byte in the SRAM regions, with or without
bit 16 set. It only changed the returned values, at 0x50704c0.
So yes, I am pretty certain there is no SRAM region that gets switched.
Even if we would want to claim there is: I wouldn't know which
address values to put into the SRAM DT node.
So I guess it's another example of: oh, we have this spare bit here. Or
it's some kind of chicken bit? I don't know, and I think the BSP code
we have seen didn't offer an explanation as well.
Cheers,
Andre
>
> Best regards,
> Jernej
>
> >
> > Since this bit is in the very same register as the actual SRAM switch,
> > we need to change the regmap lock to the SRAM lock. Fortunately regmap
> > has provisions for that, so we just need to hook in there.
> >
> > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> > ---
> > drivers/soc/sunxi/sunxi_sram.c | 23 +++++++++++++++++++++++
> > 1 file changed, 23 insertions(+)
> >
> > diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c
> > index 4458b2e0562b0..71cdd1b257eeb 100644
> > --- a/drivers/soc/sunxi/sunxi_sram.c
> > +++ b/drivers/soc/sunxi/sunxi_sram.c
> > @@ -287,6 +287,7 @@ EXPORT_SYMBOL(sunxi_sram_release);
> > struct sunxi_sramc_variant {
> > int num_emac_clocks;
> > bool has_ldo_ctrl;
> > + bool has_ths_offset;
> > };
> >
> > static const struct sunxi_sramc_variant sun4i_a10_sramc_variant = {
> > @@ -308,8 +309,10 @@ static const struct sunxi_sramc_variant sun50i_a64_sramc_variant = {
> >
> > static const struct sunxi_sramc_variant sun50i_h616_sramc_variant = {
> > .num_emac_clocks = 2,
> > + .has_ths_offset = true,
> > };
> >
> > +#define SUNXI_SRAM_THS_OFFSET_REG 0x0
> > #define SUNXI_SRAM_EMAC_CLOCK_REG 0x30
> > #define SUNXI_SYS_LDO_CTRL_REG 0x150
> >
> > @@ -318,6 +321,8 @@ static bool sunxi_sram_regmap_accessible_reg(struct device *dev,
> > {
> > const struct sunxi_sramc_variant *variant = dev_get_drvdata(dev);
> >
> > + if (reg == SUNXI_SRAM_THS_OFFSET_REG && variant->has_ths_offset)
> > + return true;
> > if (reg >= SUNXI_SRAM_EMAC_CLOCK_REG &&
> > reg < SUNXI_SRAM_EMAC_CLOCK_REG + variant->num_emac_clocks * 4)
> > return true;
> > @@ -327,6 +332,21 @@ static bool sunxi_sram_regmap_accessible_reg(struct device *dev,
> > return false;
> > }
> >
> > +
> > +static void sunxi_sram_lock(void *_lock)
> > +{
> > + spinlock_t *lock = _lock;
> > +
> > + spin_lock(lock);
> > +}
> > +
> > +static void sunxi_sram_unlock(void *_lock)
> > +{
> > + spinlock_t *lock = _lock;
> > +
> > + spin_unlock(lock);
> > +}
> > +
> > static struct regmap_config sunxi_sram_regmap_config = {
> > .reg_bits = 32,
> > .val_bits = 32,
> > @@ -336,6 +356,9 @@ static struct regmap_config sunxi_sram_regmap_config = {
> > /* other devices have no business accessing other registers */
> > .readable_reg = sunxi_sram_regmap_accessible_reg,
> > .writeable_reg = sunxi_sram_regmap_accessible_reg,
> > + .lock = sunxi_sram_lock,
> > + .unlock = sunxi_sram_unlock,
> > + .lock_arg = &sram_lock,
> > };
> >
> > static int __init sunxi_sram_probe(struct platform_device *pdev)
> >
>
>
>
>
>
