Implement a new method to load a firmware and start the remote processor. In this method the firmware is loaded first and then the loaded resource table is obtained. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx> --- drivers/remoteproc/remoteproc_core.c | 86 +++++++++++++++++++++++++++- include/linux/remoteproc.h | 2 + 2 files changed, 87 insertions(+), 1 deletion(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 34b0093689da..47956e07365e 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -38,6 +38,7 @@ #include <linux/virtio_ring.h> #include <asm/byteorder.h> #include <linux/platform_device.h> +#include <linux/tee_remoteproc.h> #include "remoteproc_internal.h" @@ -1493,6 +1494,86 @@ static int rproc_set_rsc_table(struct rproc *rproc) return 0; } +/* + * Alternative method to load a firmware and boot a remote processor with it. + * Similar to rproc_fw_boot but the resource table is obtained and parsed only after loading the + * firmware. + */ +static int rproc_alt_fw_boot(struct rproc *rproc, const struct firmware *fw) +{ + struct device *dev = &rproc->dev; + const char *name = rproc->firmware; + int ret; + + dev_info(dev, "Booting a private format image %s, size %zd\n", name, fw->size); + + /* + * if enabling an IOMMU isn't relevant for this rproc, this is + * just a nop + */ + ret = rproc_enable_iommu(rproc); + if (ret) { + dev_err(dev, "can't enable iommu: %d\n", ret); + return ret; + } + + /* Prepare rproc for firmware loading if needed */ + ret = rproc_prepare_device(rproc); + if (ret) { + dev_err(dev, "can't prepare rproc %s: %d\n", rproc->name, ret); + goto disable_iommu; + } + + /* load the image to memory */ + ret = rproc_load_segments(rproc, fw); + if (ret) { + dev_err(dev, "Failed to load firmware: %d\n", ret); + return ret; + } + + ret = rproc_set_rsc_table(rproc); + if (ret) { + dev_err(dev, "can't load resource table: %d\n", ret); + goto unprepare_device; + } + + /* reset max_notifyid */ + rproc->max_notifyid = -1; + + /* reset handled vdev */ + rproc->nb_vdev = 0; + + /* handle fw resources which are required to boot rproc */ + ret = rproc_handle_resources(rproc, rproc_loading_handlers); + if (ret) { + dev_err(dev, "Failed to process resources: %d\n", ret); + goto clean_up_resources; + } + + /* Allocate carveout resources associated to rproc */ + ret = rproc_alloc_registered_carveouts(rproc); + if (ret) { + dev_err(dev, "Failed to allocate associated carveouts: %d\n", + ret); + goto clean_up_resources; + } + + ret = rproc_start(rproc, fw); + if (ret) + goto clean_up_resources; + + return 0; + +clean_up_resources: + rproc_resource_cleanup(rproc); +unprepare_device: + /* release HW resources if needed */ + rproc_unprepare_device(rproc); +disable_iommu: + rproc_disable_iommu(rproc); + return ret; +} + static int rproc_reset_rsc_table_on_detach(struct rproc *rproc) { struct resource_table *table_ptr; @@ -1957,7 +2038,10 @@ int rproc_boot(struct rproc *rproc) goto downref_rproc; } - ret = rproc_fw_boot(rproc, firmware_p); + if (rproc->alt_boot) + ret = rproc_alt_fw_boot(rproc, firmware_p); + else + ret = rproc_fw_boot(rproc, firmware_p); release_firmware(firmware_p); } diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index b4795698d8c2..ba219a77e055 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -544,6 +544,7 @@ enum rproc_features { * @elf_machine: firmware ELF machine * @cdev: character device of the rproc * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release + * @alt_boot flag to indicate if remoteproc should use the alternate boot method. * @features: indicate remoteproc features */ struct rproc { @@ -585,6 +586,7 @@ struct rproc { u16 elf_machine; struct cdev cdev; bool cdev_put_on_release; + bool alt_boot; DECLARE_BITMAP(features, RPROC_MAX_FEATURES); }; -- 2.25.1