On Wed, Feb 14, 2024 at 5:15 AM Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> wrote:
>
> On Sat, 10 Feb 2024 14:46:00 -0600
> Adam Ford <aford173@xxxxxxxxx> wrote:
>
> > From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> >
> > The HDMI irqsteer is a secondary interrupt controller within the HDMI
> > subsystem that maps all HDMI peripheral IRQs into a single upstream
> > IRQ line.
> >
> > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> > ---
> > V2: Add my (Adam) s-o-b and re-order position under AIPS4
> > ---
> > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 0730d4cf9bc4..9b8ab367d774 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1927,6 +1927,19 @@ hdmi_blk_ctrl: blk-ctrl@32fc0000 {
> > "hdcp", "hrv";
> > #power-domain-cells = <1>;
> > };
> > +
> > + irqsteer_hdmi: interrupt-controller@32fc2000 {
> > + compatible = "fsl,imx-irqsteer";
> > + reg = <0x32fc2000 0x44>;
>
> The last register being at offset 0x44, this should be <0x32fc2000
> 0x48> or even <... 0x1000> as the TRM mentions a 4 kB size.
I'll do 0x1000 in the next revision to match the documentation since
there doesn't appear to be any overlap.
adam
>
> [Tested using Avnet MSC SM2S-IMX8PLUS SoM on Avnet MSC SM2-MB-EP1]
> Tested-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
>
>
> Luca
>
> --
> Luca Ceresoli, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
