As runtime PM is enabled, the module can be runtime suspended when .remove() is called. Do a pm_runtime_get_sync() to make sure module is active before doing any register operations. Doing a pm_runtime_put_sync() should disable the refclk so no need to disable it again. Fixes the below warning at module removel. [ 39.705310] ------------[ cut here ]------------ [ 39.710004] clk:162:3 already disabled [ 39.713941] WARNING: CPU: 0 PID: 921 at drivers/clk/clk.c:1090 clk_core_disable+0xb0/0xb8 Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx> --- Changelog: v3: no change v2: no change https://lore.kernel.org/all/20240205141221.56076-3-rogerq@xxxxxxxxxx/ v1: https://lore.kernel.org/all/20240201121220.5523-3-rogerq@xxxxxxxxxx/ --- drivers/usb/dwc3/dwc3-am62.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c index 1bfc9e67614f..600ba9cfefea 100644 --- a/drivers/usb/dwc3/dwc3-am62.c +++ b/drivers/usb/dwc3/dwc3-am62.c @@ -273,6 +273,11 @@ static void dwc3_ti_remove(struct platform_device *pdev) struct dwc3_am62 *am62 = platform_get_drvdata(pdev); u32 reg; + pm_runtime_get_sync(dev); + + device_wakeup_disable(dev); + device_set_wakeup_capable(dev, false); + of_platform_depopulate(dev); /* Clear mode valid bit */ @@ -281,7 +286,6 @@ static void dwc3_ti_remove(struct platform_device *pdev) dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); pm_runtime_put_sync(dev); - clk_disable_unprepare(am62->usb2_refclk); pm_runtime_disable(dev); pm_runtime_set_suspended(dev); } -- 2.34.1
