Hi Romain On 09/02/24 22:41, Romain Naour wrote:
The tps659413 node set WKUP_GPIO0_83 (AA37) pin as input to be used as PMIC interrupt but uses 39 (WKUP_GPIO0_39) as "interrupts" property. Replace 39 by 83 after checking in the board schematic [1]. [1] https://www.ti.com/tool/SK-AM69 Fixes: 865a1593bf99 ("arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC") Cc: Neha Malcom Francis <n-francis@xxxxxx> Signed-off-by: Romain Naour <romain.naour@xxxxxxxx> --- arch/arm64/boot/dts/ti/k3-am69-sk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 8da591579868..95c9d3da59d3 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -646,7 +646,7 @@ tps659413: pmic@48 { pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&wkup_gpio0>; - interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + interrupts = <83 IRQ_TYPE_EDGE_FALLING>; gpio-controller; #gpio-cells = <2>; ti,primary-pmic;
Thanks for catching this! Reviewed-by: Neha Malcom Francis <n-francis@xxxxxx> -- Thanking You Neha Malcom Francis
