From: Nitin Yadav <n-yadav@xxxxxx> Add sdhci0 DT node in k3-am62a-main for eMMC support. Add otap/itap values according to the datasheet[0], refer to Table 7-79. [0] https://www.ti.com/lit/ds/symlink/am62a3.pdf Signed-off-by: Nitin Yadav <n-yadav@xxxxxx> Signed-off-by: Judith Mendez <jm@xxxxxx> --- Changes since V3: - No change --- arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 972971159a62..ce5f278235a4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -536,6 +536,24 @@ main_gpio1: gpio@601000 { status = "disabled"; }; + sdhci0: mmc@fa10000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 57 5>, <&k3_clks 57 6>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&k3_clks 57 6>; + assigned-clock-parents = <&k3_clks 57 8>; + bus-width = <8>; + mmc-hs200-1_8v; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-hs200 = <0x6>; + status = "disabled"; + }; + sdhci1: mmc@fa00000 { compatible = "ti,am62-sdhci"; reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>; -- 2.43.0
