On Wed, 31 Jan 2024 22:14:29 +0100, Johan Jonker wrote: > The hdmi-connector nodes are now functional and the new way to model > hdmi ports nodes with both in and output port subnodes. Unfortunately > with the conversion to YAML the old method with only an input port node > was used. Later the new method was also added to the binding. > A binding must be unambiguously, so remove the old port property > entirely and make port@0 and port@1 a requirement as all > upstream dts files are updated as well and because checking > deprecated stuff is a bit pointless. > Update the example to avoid use of the removed property. > > [...] Applied, thanks! [3/6] ARM: dts: rockchip: fix rk3288 hdmi ports node commit: 585e4dc07100a6465b3da8d24e46188064c1c925 [4/6] ARM: dts: rockchip: fix rk322x hdmi ports node commit: 15a5ed03000cf61daf87d14628085cb1bc8ae72c [5/6] arm64: dts: rockchip: fix rk3328 hdmi ports node commit: 1d00ba4700d1e0f88ae70d028d2e17e39078fa1c [6/6] arm64: dts: rockchip: fix rk3399 hdmi ports node commit: f051b6ace7ffcc48d6d1017191f167c0a85799f6 Best regards, -- Heiko Stuebner <heiko@xxxxxxxxx>