Re: [PATCH v10 2/4] dt-bindings: remoteproc: add Tightly Coupled Memory (TCM) bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 13 Feb 2024 09:54:48 -0800, Tanmay Shah wrote:
> From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
> 
> Introduce bindings for TCM memory address space on AMD-xilinx Zynq
> UltraScale+ platform. It will help in defining TCM in device-tree
> and make it's access platform agnostic and data-driven.
> 
> Tightly-coupled memories(TCMs) are low-latency memory that provides
> predictable instruction execution and predictable data load/store
> timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
> banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
> 
> The TCM resources(reg, reg-names and power-domain) are documented for
> each TCM in the R5 node. The reg and reg-names are made as required
> properties as we don't want to hardcode TCM addresses for future
> platforms and for zu+ legacy implementation will ensure that the
> old dts w/o reg/reg-names works and stable ABI is maintained.
> 
> It also extends the examples for TCM split and lockstep modes.
> 
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxx>
> Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
> ---
> 
> Changes in v10:
>   - modify number of "reg", "reg-names" and "power-domains" entries
>     based on cluster mode
>   - Add extra optional atcm and btcm in "reg" property for lockstep mode
>   - Add "reg-names" for extra optional atcm and btcm for lockstep mode
>   - Drop previous Ack as bindings has new change
> 
> Changes in v9:
>   - None
> Changes in v8:
>   - None
> Changes in v7:
>   - None
> Changes in v6:
>   - None
> Changes in v5:
>   - None
> 
> Changes in v4:
>   - Use address-cells and size-cells value 2
>   - Modify ranges property as per new value of address-cells
>     and size-cells
>   - Modify child node "reg" property accordingly
>   - Remove previous ack for further review
> 
> v4 link: https://lore.kernel.org/all/20230829181900.2561194-2-tanmay.shah@xxxxxxx/
> 
>  .../remoteproc/xlnx,zynqmp-r5fss.yaml         | 192 ++++++++++++++++--
>  1 file changed, 170 insertions(+), 22 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml:118:13: [warning] wrong indentation: expected 10 but found 12 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240213175450.3097308-3-tanmay.shah@xxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux